Torque wrench
#2
Nordschleife Master
SK Tools has a very nice one for about $350. I like it better than the snap on one and it has a ratchet head. The instructions say you can leave it set for a few days without it altering its torque calibration, however, I don't do that.
#4
Super Moderator
Needs More Cowbell
Lifetime Rennlist
Member
Needs More Cowbell
Lifetime Rennlist
Member
I prefer split beam type torque wrenches since you don't have to "unwind" them after each use.
They are generally a bit more expensive (and accurate) than "spring types", but IMHO worth it.
FWIW, I've used this one for my son's karts for years:
http://www.tooldiscounter.com/ItemDi...kw=PREC2FR100F
They are generally a bit more expensive (and accurate) than "spring types", but IMHO worth it.
FWIW, I've used this one for my son's karts for years:
http://www.tooldiscounter.com/ItemDi...kw=PREC2FR100F
#5
I don't have the mag in front of me but in this month's GRM they compared a cheapie HF clicker wrench, a more expensive (Craftsman?) clicker and a pricey split-beam. I won't ruin the surprise but don't discount the cheapie.....
#7
Anyone with experience using a Neiko Tools torque wrench ?
http://www.toolprice.com/product/799...00_Ft_Lbs.html
http://www.toolprice.com/product/799...00_Ft_Lbs.html
Trending Topics
#8
Rennlist Member
Thread Starter
Thanks for the info, i didnt think that craftsman and others made one large enough to do the wheels.
#9
Rennlist Member
Thread Starter
I prefer split beam type torque wrenches since you don't have to "unwind" them after each use.
They are generally a bit more expensive (and accurate) than "spring types", but IMHO worth it.
FWIW, I've used this one for my son's karts for years:
http://www.tooldiscounter.com/ItemDi...kw=PREC2FR100F
They are generally a bit more expensive (and accurate) than "spring types", but IMHO worth it.
FWIW, I've used this one for my son's karts for years:
http://www.tooldiscounter.com/ItemDi...kw=PREC2FR100F
#10
Rennlist Member
Thread Starter
Anyone with experience using a Neiko Tools torque wrench ?
http://www.toolprice.com/product/799...00_Ft_Lbs.html
http://www.toolprice.com/product/799...00_Ft_Lbs.html
#11
Instructor
Join Date: Jul 2006
Location: Manchester, NH
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
You guys asking & answering these questions do know that you need 344 ft/lbs to torque the wheels? As for the pricing lets debate this.....You have a $100k car and you are going to skimp out on buying the correct tool (Snap-On 3/4" Drive $500.00 look on ebay it cost $200.00 to get it calibrated) to make sure that the $5k wheels don't fall off and potentially cost $20-30k when you hit the wall?
Good luck
Good luck
#12
Instructor
Join Date: Jul 2006
Location: Manchester, NH
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
#13
Super Moderator
Needs More Cowbell
Lifetime Rennlist
Member
Needs More Cowbell
Lifetime Rennlist
Member
#14
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
i only use snap on and matco tools on my cars.
the other tools my wife use to fix her cars. no wonder it's always broken.
the other tools my wife use to fix her cars. no wonder it's always broken.
#15
Rennlist Member
Thread Starter
I guess the 400 figure I was told was newton meters????
Not looking for "a deal" just asking around what people were using.
I am all to aware of the cost of my car and parts.
Thanks all.