FLA997

After searching for months, to include PMNA who could not offer any assistance, I am trying to locate a 993 Cup shift ****. Probably the same one as a 964 Cup. Any leads would be appreciated - and if someone happens to have one laying aruond, consider it sold.

Or...if any of the 964 Cup guys have found an alternative, please share.

Jarez Mifkin

Isn't it the same as a street car?

FLA997

Unfortunately, no.

The street cars have a ****/boot combo. The 993 Cup, and Im pretty sure the 964 Cup, have a single rubber **** that attaches to the shift lever. Pic below:

Jarez Mifkin

I just went out to the garage and verified that the picture above is the same as my RSR. I thought that was a picture of my car at first, but then I saw the door skin on the passenger door and ruled it out! I looked for a part number on the ****, but to no avail. Have you tried Werks II?

FLA997

Thanks for verifying...I did try Werks II...no dice. Kinda funny, such a simple little piece of rubber is so hard to find - I certianly didnt expect it to be easy, but I cant even find anyhitng that remotely resembles the factory piece.

38D

964 cup uses the normal street ****/boot...must be a 993 cup thing

FLA997

Thanks Colin - still searching.

GTP993

The **** is the same on the street car, just have to carefully cut the stitching on the leather boot. If anyone upgraded their factory 993/964 **** they may sell you their original cheap. Good luck

Bill Verburg

I agree, its lever 964.424.015.08, the accompanying rod is 964.424.020.35

the **** & leather boot on the 993RS is 993.424.075.30(8YR) on the Cup & RSR they just removed the leather boot.

There is a simplified bellows that goes over the shift lever 964.424.141.00

FLA997

Bill-

Just to clarify, I have the 993 RS Shift **** and it is not the same shape as the non-RS Shift ****, from a stock C-2.

The one I am looking for is more round in shape, and it certianly makes sense that it would be the same as the original **** **** with the leather removed. The RS variety isnt round in shape.

So all I need is a stock 993 shift **** and trim the leather away...correct?

You mention a "rod" above.....?

jdistefa

Rob,

Why not just treat yourself to one of Jeff Gamroth's shifters?

FLA997

Those are nice! Looking more for the authentic look, however.

Did you get one, Matt?

Bill Verburg

Rob, the pic you attached above is one I took( I think), it is a 993Cup.

Here is some more info

lever 964.424.015.08
fork 964.424.017.01
rod 964.424.020.35
**** 993.424.075.30 8YR

lever 964.424.015.08
fork 964.424.017.01
rod 964.424.020.32 >'92 .08 '93>
**** 964.424.075.03 1AJ
simplified bellows 964.424.141.00

Thanks to G Ring for the RS shifter pics










993RS Cup


993RS Cup


964Cup


996Cup


the 993Cup **** #23 looks just like the stock **** in my '95 993 except for the color.

under the **** the lever is different and under the tunnel the rod is different

FLA997

OK, gotcha Bill....I got lost when we went from inside the car to underneath it... ;-)

Bill Verburg

Do you have the stock '95 **** or the one that looks like the 996 pictured above?