SCCA GT-2 classing for 2018 997 Cup
#1
SCCA GT-2 classing for 2018 997 Cup
Hello,
I figured it would not be a bad idea to start this type of thread for rules and what we can do to these cars to get them in GT-2.
We have an IMSA 997.1 that we are converting and have been seeing all kinds of stuff come up that HAS to be changed to classify the car properly.
The requirements I have come across so far are
Windshield clips 2 bottom 3 top
Rear window straps 2
Remove door windows and install left side net
Right side net recommended.
please any comments of know rules or modifications are welcome
I figured it would not be a bad idea to start this type of thread for rules and what we can do to these cars to get them in GT-2.
We have an IMSA 997.1 that we are converting and have been seeing all kinds of stuff come up that HAS to be changed to classify the car properly.
The requirements I have come across so far are
Windshield clips 2 bottom 3 top
Rear window straps 2
Remove door windows and install left side net
Right side net recommended.
please any comments of know rules or modifications are welcome
Last edited by crashtest22; 02-21-2018 at 09:27 PM.
#2
just found this little piece of info in the GRC.
Not sure how I feel about this.
Glass and/or plastic headlights, front parking lights, front signal lights, lenses, and bulbs shall be
removed. Headlight openings shall be covered with a wire mesh screen or panel having the same
contour as the original lens, mounted so that the headlight bezel/rim remains in place, maintaining
the standard appearance of the Production automobile. Side marker light assemblies shall be
removed and the resulting openings covered with a plate whose dimensions do not exceed those
of the original parts; side marker lights that are an integral part of the taillight assembly cannot be
removed.
Not sure how I feel about this.
Glass and/or plastic headlights, front parking lights, front signal lights, lenses, and bulbs shall be
removed. Headlight openings shall be covered with a wire mesh screen or panel having the same
contour as the original lens, mounted so that the headlight bezel/rim remains in place, maintaining
the standard appearance of the Production automobile. Side marker light assemblies shall be
removed and the resulting openings covered with a plate whose dimensions do not exceed those
of the original parts; side marker lights that are an integral part of the taillight assembly cannot be
removed.