FS: 928 Spider Intake from '79 K-Jet Car - Rennlist

03-28-2017, 02:06 PM

#1

Petza914

RL Community Team
Rennlist Member

Thread Starter

Join Date: Oct 2007

Location: Clemson, SC

Posts: 25,838

Likes: 1,121

Received 6,462 Likes on 4,118 Posts

FS: 928 Spider Intake from '79 K-Jet Car

Category: Engine - Intake/Fuel
Price (no $ sign please): $250
Private or Vendor Listing: Private Listing
Part fits (select ONLY those which apply): 928
Location (Region): SouthEast
Item Condition: Used

Have a spare intake from my '79 928 K-Jet car that I'm selling. The reason is that I bought replacement Euro legs that were already powdercoated and married those to a spare spider body, which is what's currently installed in my car.

These are in nice shape and very clean, as I ran them through a cycle in my heated, ultrasonic parts washer with an aluminum-safe TASCsonic cleaner in a 5:1 water to cleaner ratio (I can look up the name if it's important) then thoroughly rinsed in clean water. Remaining clean-up required is the adhesive from the crest position on the body as it looks like it had been previously glued on and needs to be scraped/chipped off.

Includes the 8 legs, body, boots, clamps, long bolt, curved pipe, etc and is essentially complete. Boots should probably be renewed during installation.

Part #s are as follows:
928.110.281.2R x 2
928.110.282.3R x 2
928.110.284.2R x 2
928.110.288.2R x 2
& body 928.110.156.2R

Other pieces in the description above, but not shown in the photos are included.

Like