Mark this thread as Unsold
997.2 GTS bumpers fenders and carrera aero kit rear decklid
#1
997.2 GTS bumpers fenders and carrera aero kit rear decklid
Category: Exterior - Body Parts
Price (no $ sign please): $1000
Private or Vendor Listing: Private Listing
Part fits (select ONLY those which apply): 997
Location (Region): Midwestern
Item Condition: Brand New
997 - Gen 2 GTS front bumper, rear bumper, and both front fenders - all brand new, never mounted.
Rear bumper: $600 MAKE OFFER.
Front bumper: SOLD.
Fenders: $400 each, 700 for pair
997 aero kit rear decklid (used) and has quick release tab mounts on the rear which are pop riveted in place - would need to be removed and repaired if going on a street car. SOLD.
6/16/16: Update: Rear bumper and front fenders still available.
Last edited by SamGrant951; 06-16-2016 at 04:16 PM.
Trending Topics
#11
Added two pictures of wing part number now that I found where it was located! 997.512.225.00 - I can only assume its factory but I don't have another one to compare it against?
Assume shipping costs in the $150 range in the con-US, will deliver in the midwest. Has some bumps/bruises and would have to have the holes filled that were drilled for quick release / zip ties on the grills. Price reflects that but feel free to make an offer.
Thanks,
Sam
Assume shipping costs in the $150 range in the con-US, will deliver in the midwest. Has some bumps/bruises and would have to have the holes filled that were drilled for quick release / zip ties on the grills. Price reflects that but feel free to make an offer.
Thanks,
Sam
#12
Can confirm that's the correct part number for the 997.2 XAA wing/decklid.
Not affiliated.
After having prepped/painted a few of these I can help others with finishing estimates. Cost to properly fix and paint this will be around $1800-$2k based on what I'm seeing. Slapped together Macco job around $1k.
Also, that's not the correct fan for the XAA decklid. It's the standard mechanically winged decklid fan.
Buyer will need fan 997.624.056.05. I have all part numbers needed for the XAA decklid/wing assembly if a buyer needs them.
Not affiliated.
After having prepped/painted a few of these I can help others with finishing estimates. Cost to properly fix and paint this will be around $1800-$2k based on what I'm seeing. Slapped together Macco job around $1k.
Also, that's not the correct fan for the XAA decklid. It's the standard mechanically winged decklid fan.
Buyer will need fan 997.624.056.05. I have all part numbers needed for the XAA decklid/wing assembly if a buyer needs them.
#14
Not without serious modification to the underside of the decklid. The turbo ram-air openings on the decklid are farther fore and the openings on the airbox are farther aft than the X51 powerkit Carerras. And the fan is in a different position to clear the intake piping: