Mark this thread as Unsold
Porsche 18" Single Forged Aluminum Wheels
#1
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Category: Wheels & Tires
Price (no $ sign please): $1300
Private or Vendor Listing: Private Listing
Part fits (select ONLY those which apply): 996
Location (Region): SouthEast
Item Condition: Used
Buyer pays shipping and handling costs
CCW Single Forged Aluminum Wheels 18" which fit my 2004 Porsche Carrera 996.
Please note new Offset measurement for the front wheels: Sorry about the confusion.
Wheels are fitted with used Michelin Pilot Sport Cup tires:
Front 235/40 ZR 18
165mm Inset
45mm Offset
Wheel width 9"
Rear 295/30 ZR 18
215mm Inset
70mm Offset
Wheel width 11 1/2"
A new set of CCW Wheels without tires, start around $2800.00
Contact Bob rs996@comcast.net
Last edited by 1Agio; 11-19-2012 at 03:21 PM. Reason: new measurements
#5
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Offsets? Widths
#7
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Set of CCW Single Forged Aluminum Wheels 18”, which fit on my 2004 regular body Porsche Carrera 996.
Wheels are fitted with used Michelin Pilot Sport Cup tires:
Front 235/40 ZR 18
165mm Inset
80mm Offset
Wheel width 9"
Rear 295/30 ZR 18
215mm Inset
80mm Offset
Wheel width 11 1/2"
Buyer pays shipping and handling.
Forgive my tardiness for this post, my computer crashed and I'm using a temporary computer.
Wheels are fitted with used Michelin Pilot Sport Cup tires:
Front 235/40 ZR 18
165mm Inset
80mm Offset
Wheel width 9"
Rear 295/30 ZR 18
215mm Inset
80mm Offset
Wheel width 11 1/2"
Buyer pays shipping and handling.
Forgive my tardiness for this post, my computer crashed and I'm using a temporary computer.
![Frown](https://rennlist.com/forums/images/smilies/frown.gif)
Trending Topics
#8
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
80mm offset is just not possible...can you check it out please there is numerous ways of checking via google and etc or call john at ccw..
#9
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
So i did some research and pretty much if i understand this correctly the inset is the measurment of the wheels from the hub towards the inside of the car where as the offset is the hub to the outside giving us the rear wheels 8.4 on the inside( from hub towards inner fender ) and offset 3.1 inches from hub to the outside. I'm still a bit foggy on the "offset" that we all go by
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)