Heigo half cage
#1
Rennlist Member
Thread Starter
Heigo half cage
Seems like a lot of people on here are asking about pics of a half cage.
Here is one option.
Here is one option.
#2
Nordschleife Master
Looks like the pro of that cage is you don't have to cut carpet. The con is that the harness mount point is way too high. You want the should strap mounts to be at the level of the shoulder or a couple degrees below.
#3
Rennlist Member
Thread Starter
But I agree that for some it may be too high.
Seems like another option was the Wiecher's bar that was posted on here. It was as low as the factory hard points for the CS. But it seems like it fizzled.
#4
Rennlist Member
Not commenting on the height of the bar but
I have to say I do like the look of that bar
I have to say I do like the look of that bar
#5
Nordschleife Master
Originally Posted by ExMB
No problem with my shoulder heights so far.
But I agree that for some it may be too high.
Seems like another option was the Wiecher's bar that was posted on here. It was as low as the factory hard points for the CS. But it seems like it fizzled.
But I agree that for some it may be too high.
Seems like another option was the Wiecher's bar that was posted on here. It was as low as the factory hard points for the CS. But it seems like it fizzled.
#6
I have a long torso with my helmet almost touching roof (I'm 6'1)...wondering if that'll make it level for me.
#7
Rennlist Member
Thread Starter
Trending Topics
#9
Burning Brakes
I had one of these Heigo bars in my 987 before I stripped the car and installed a full cage. Heigo makes a nice product. It fit like a glove, all the pieces bolt together, and the carpet didn't need to be cut. The shock tower plastic trim needed to either be cut or removed on the 987. There are two choices for the location of a harness bar. One is as shown in the pics above. The other is further aft, between the shock towers. There are additional options including x-bracing.
#10
Rennlist Member
Thread Starter
I had one of these Heigo bars in my 987 before I stripped the car and installed a full cage. Heigo makes a nice product. It fit like a glove, all the pieces bolt together, and the carpet didn't need to be cut. The shock tower plastic trim needed to either be cut or removed on the 987. There are two choices for the location of a harness bar. One is as shown in the pics above. The other is further aft, between the shock towers. There are additional options including x-bracing.
#12
Rennlist Member
Thread Starter
#14
Three Wheelin'
But you would know better if that is the case. It just looks like that to me in the picture.