Mark this thread as Unsold
For Sale: 951-968 Time attack Race car - roller
#1
Race Car
Thread Starter
Join Date: Sep 2005
Location: TEXAS
Posts: 4,247
Likes: 0
Received 0 Likes
on
0 Posts
951-968 Time attack Race car - roller
I tried. I tried hard. Too many hits from life.. SO ... I'm out. I held on with tooth and nail on a project that I had small hopes to finally finish. Relatively, there's just not much more to go to finish her. Much of the details of my build are right here on Rennlist. Here are the links to some of the Threads I started. Read this post first, then try to go back through them to get a good feel for the details I've put into this car. Way too many for sure. HereLS6 build hereAluminum torque tube here
Here is a quick general list of parts and prices / time I've spent with her. Nowhere near the detail or true cost of this project, but at least a good idea of whats included. The price I'm asking reflects a number that I feel is market friendly for a quick sale. Ask anyone who has started to build a racecar to half this level and they will probably cry when they realize they could have bought this one for pennies on the dollar compared to what they've spent.
I'm only asking $18K for this $50K build. It's painful, but I need it sold. Rear wing is not included.
Here is the quick rundown of parts/work and cost list. A trillion more details are missed below along with a trillion little parts not included. This should get you a good idea though.
Fiberglass Doors $1,000
Complete fiberglass widebody rear. $2,500
Daytona Racing fiberglass front end & tube frame $3,000
Full Racing cage with Baskets $7,000
Front/Rear 996 Monoblock brakes 13” rotors $1,500
968 front spindles and Lower controll arms $500
Forged lightweight Rims 18x10f 18x12 rear $2,200
Sparco seats $1,000
Custom Aluminum Torque tube and 951 Trans $3,500
Rear torsion bar delete with sphericals $1,500
Weltmeister Rear sway $400
LS6 motor with $3K heads and Dry sump $10,000
Lexan windshield $500
Top mount tilton Pedal assembly with Master cyls $700
Mercedes F1 Paint Scheme $3,000
Body Harness, Engine harness and ECU $1,000
044 Fuel pump $100
Fiberglass work, fabrication and modifications $10,000
$49,400
Here is a quick general list of parts and prices / time I've spent with her. Nowhere near the detail or true cost of this project, but at least a good idea of whats included. The price I'm asking reflects a number that I feel is market friendly for a quick sale. Ask anyone who has started to build a racecar to half this level and they will probably cry when they realize they could have bought this one for pennies on the dollar compared to what they've spent.
I'm only asking $18K for this $50K build. It's painful, but I need it sold. Rear wing is not included.
Here is the quick rundown of parts/work and cost list. A trillion more details are missed below along with a trillion little parts not included. This should get you a good idea though.
Fiberglass Doors $1,000
Complete fiberglass widebody rear. $2,500
Daytona Racing fiberglass front end & tube frame $3,000
Full Racing cage with Baskets $7,000
Front/Rear 996 Monoblock brakes 13” rotors $1,500
968 front spindles and Lower controll arms $500
Forged lightweight Rims 18x10f 18x12 rear $2,200
Sparco seats $1,000
Custom Aluminum Torque tube and 951 Trans $3,500
Rear torsion bar delete with sphericals $1,500
Weltmeister Rear sway $400
LS6 motor with $3K heads and Dry sump $10,000
Lexan windshield $500
Top mount tilton Pedal assembly with Master cyls $700
Mercedes F1 Paint Scheme $3,000
Body Harness, Engine harness and ECU $1,000
044 Fuel pump $100
Fiberglass work, fabrication and modifications $10,000
$49,400
#2
Rennlist Member
For all those thinking about doing it yourself, don't. Buy this! Having built one from scratch, this is a great deal, and looks like an excellent build. If I were starting over again, I'd be all over this! Unfortunately, I just got done parting mine out, for about the same money, after I wrecked it. This is a deal!
#3
Rennlist Member
Some unsolicited advice? Change the title to "well sorted race car project" and state the price in the first line. At a quick glance, it looks like you want $49,400 for a "roller". Roller usually means no engine.
#5
#6
Rennlist Member
yeh is this 18k for 49k?