Uploading Config to Smartycam HD
05-17-2017 | 12:45 PM
#1
Thread Starter
Rennlist Member
Joined: Dec 2013
Posts: 4,775
Likes: 270
From: Edmond, OK
Uploading Config to Smartycam HD
I'm at the track and my surface 2 pro won't connect to my Smartycam HD v1 without a USB hub, which I forgot. I'm trying to upload a new config via SD but I'm not having any luck using export or copying to SD and then selecting config load on the cam. Are there any tricks to make this work or something I am missing? Thx!
05-17-2017 | 01:30 PM
#2
Rennlist Hoonigan
which cost no drachmas
Lifetime Rennlist
Member
Rennlist
Site Sponsor
which cost no drachmas
Lifetime Rennlist
Member
Rennlist
Site Sponsor
Joined: Dec 2001
Posts: 12,741
Likes: 1,037
From: Manchester, NH
I don't do it that way very often, but I don't remember having trouble. Try deleting the config on the camera and then doing it. I can't try it here - I'm sold out of cameras and won't have anymore until tomorrow.
If all else fails, call AiM at 540.342.9680 and they can walk you through it.
If all else fails, call AiM at 540.342.9680 and they can walk you through it.