AIM SOLO DL individual wheel speed sensor on GT4
#1
Instructor
Thread Starter
AIM SOLO DL individual wheel speed sensor on GT4
In trying to diagnose a very irritating front ABS engagement at moderate to high pedal pressure i would like to be able to log the individual wheel speed sensors. I am currently using the OBD II connection for the AIM SOLO DL and its not reading the individual wheel sensors. For you guys who have moved on to the CAN connection can you please tell of the individual wheel speed sensors can be logged.
#2
Three Wheelin'
I have data from a GT 4 Clubsport using Motec with CAN signal and no wheel speeds are logged (that could be due to how Chris Brown wrote the protocol). However, AIM does show it available to be logged in this document for the 2013 Cayman. This protocol does provide wheel speed for the 991 but not sure it is correct for GT 4.
http://aim-sportline.com/download/ec...11_105_eng.pdf.
Also, check out this post: https://rennlist.com/forums/data-acq...ure-981-a.html
http://aim-sportline.com/download/ec...11_105_eng.pdf.
Also, check out this post: https://rennlist.com/forums/data-acq...ure-981-a.html
#3
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,157
Received 3,340 Likes
on
1,895 Posts
I do see wheel speeds (PSH_XXX) off a 981 GT4 CAN connected file using the 991_911 AiM protocol.
There is a new CAYMAN_GT4_CLUBSPORT protocol (at least in the .94 release of RS2), but I have not tested this on a Club Sport, yet.
There is a new CAYMAN_GT4_CLUBSPORT protocol (at least in the .94 release of RS2), but I have not tested this on a Club Sport, yet.
__________________
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
#5
Rennlist Member
AIM Solo on a GT4 using a CAN connection. I'm only getting brake pressure on PR4. Using the 991-911 for the ECU Model and verified that I have all 4 channels activated in the configuration. Is this normal?
Thanks.
Thanks.
#6
Rennlist Member
#7
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,157
Received 3,340 Likes
on
1,895 Posts
That is correctly functioning configuration for this model car with this protocol. You do get wheel speeds, correct?