Circuit tools won't show laps?
#1
Three Wheelin'
Thread Starter
Circuit tools won't show laps?
Odd. I have a new run file of 5 laps, and set a start and a finish on the map,
both conveniently in a place where the car is within a foot of the same place
every time, and they show on the screen, but the 'lap options' and 'show laps'
remain grayed out, and the graph stays showing the whole VBOX recording
(2 hours of an autocross), with mostly flatline with 5 narrow high peaks for
the 5 runs...
I have certainly used circuit tools on other files and routinely get the 5
separate laps and the fast lap, and the delta graph, but something's odd
with this file... Any ideas?
thanks
both conveniently in a place where the car is within a foot of the same place
every time, and they show on the screen, but the 'lap options' and 'show laps'
remain grayed out, and the graph stays showing the whole VBOX recording
(2 hours of an autocross), with mostly flatline with 5 narrow high peaks for
the 5 runs...
I have certainly used circuit tools on other files and routinely get the 5
separate laps and the fast lap, and the delta graph, but something's odd
with this file... Any ideas?
thanks
#2
Three Wheelin'
Thread Starter
And oddly, the start/finish wizard says there are '25 laps detected'! but the graph of the whole
record shows only the 5 peaks... I suspect the file is corrupted from when I said to save to the file?
record shows only the 5 peaks... I suspect the file is corrupted from when I said to save to the file?
#3
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,097
Received 3,270 Likes
on
1,865 Posts
Corrupt file...
Generated by Racelogic hardware, or something else?
Generated by Racelogic hardware, or something else?
__________________
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
#4
Three Wheelin'
Thread Starter
OK, I think I found the problem. The gate width was 80-something feet, which I guess crosses
the track in more than one place for start and finish.... Narrowing it to 10 feet got me back to
planet earth...
the track in more than one place for start and finish.... Narrowing it to 10 feet got me back to
planet earth...
#5
Three Wheelin'
Thread Starter
VBOX Sport. I also tried exporting from the Porsche app to a .vdo, but
out of 15 laps (and videos!) supposedly recorded by the app, I do have
the 15 videos, but there is only one retained data file, and it isn't even
one complete lap.
out of 15 laps (and videos!) supposedly recorded by the app, I do have
the 15 videos, but there is only one retained data file, and it isn't even
one complete lap.
#6
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,097
Received 3,270 Likes
on
1,865 Posts
Recommend at least 10 meters gate width.