New to me 718CS MR. Need a cable to run from VBox to CAN plug in under passenger door. Is there a source for a cable that’s terminated at both ends and is simply plug and play? As an aside, will the VBox on the CAN conflict with the Motec C125 that’s already installed.

Thanks for any help / guidance.

Mark W.

 

I sell a plug and play cable (as well as complete PnP kits) for the VBOX HD2 and the 718 GT4 CS.

For $150 plus freight for the cable only, I will include a basic scene that can be loaded to the HD2 to show the 718 GT4 CS parameters needed for driver improvement.

It will not be in conflict with the MoTeC C125 as BOTH systems will be "listening" to the information sent out from the Cosworth ICD through the gateway at the "CAN" connector in the passenger side door sill.

Is the MoTeC plugged in there, also? If so, more wiring will be needed, but certainly this can be supplied relatively quickly, easily and inexpensively.

Please email me directly, if you're interested in pursuing this.

 

Peter, Thanks so much for your reply. I’ll be in touch!

Mark W.