Trigger Commands don't appear to work on MXG and RS3?
07-30-2019 | 03:42 PM
#16
Rennlist Hoonigan
which cost no drachmas
Lifetime Rennlist
Member
Rennlist
Site Sponsor
which cost no drachmas
Lifetime Rennlist
Member
Rennlist
Site Sponsor
Joined: Dec 2001
Posts: 12,741
Likes: 1,037
From: Manchester, NH
07-30-2019 | 03:47 PM
#17
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Joined: Jun 2008
Posts: 19,273
Likes: 3,473
From: Durham, NC and Virginia International Raceway
I've been impressed with the reliability, configurability and price point of the AEM. Their main support engineer online is terrific.
__________________
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
07-30-2019 | 03:55 PM
#18
Rennlist Hoonigan
which cost no drachmas
Lifetime Rennlist
Member
Rennlist
Site Sponsor
which cost no drachmas
Lifetime Rennlist
Member
Rennlist
Site Sponsor
Joined: Dec 2001
Posts: 12,741
Likes: 1,037
From: Manchester, NH
Horses for courses!
07-31-2019 | 07:35 AM
#19
Thread Starter
Advanced
Joined: Feb 2017
Posts: 56
Likes: 0
Just received an email from Stefano at AIM Italy in response to my email. He had some interesting ideas which dovetail quite nicely off something that was suggested earlier by ProCoach.
It seems I may be the victim of clashes in the commands due to updates in firmware and software with time. According to Stefano, sometimes commands don't make it through the software and firmware update process, and thus, no longer work.
The other suggestion he had was to pair down my use of alarms and commands in order to reduce the workload of the device. Not sure how I feel about this, given that I want even more alarms....
His primary advice though as that I delete all of the alarms and math channels and then start over from scratch in constructing them.
I will carry all of this out sometime today and report back with my findings.
It seems I may be the victim of clashes in the commands due to updates in firmware and software with time. According to Stefano, sometimes commands don't make it through the software and firmware update process, and thus, no longer work.
The other suggestion he had was to pair down my use of alarms and commands in order to reduce the workload of the device. Not sure how I feel about this, given that I want even more alarms....
His primary advice though as that I delete all of the alarms and math channels and then start over from scratch in constructing them.
I will carry all of this out sometime today and report back with my findings.
07-31-2019 | 08:19 AM
#20
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Joined: Jun 2008
Posts: 19,273
Likes: 3,473
From: Durham, NC and Virginia International Raceway
Bingo!
My experience, for sure. Building a new config from scratch IN the most current release of the software, with the devices on the most current release of the firmware is often the best solution.
Let et us know!
My experience, for sure. Building a new config from scratch IN the most current release of the software, with the devices on the most current release of the firmware is often the best solution.
Let et us know!
08-01-2019 | 06:48 PM
#21
Thread Starter
Advanced
Joined: Feb 2017
Posts: 56
Likes: 0
Ok... took a minute, but I made a new configuration from scratch, and for the most part, it all appears to work now. The only thing I have noticed, and again, not sure if it is a bug, is that when I set RS3 to display the Gear in a certain colour, it does not do it on all screens... just certain ones.
Again, I have sent an email to Stefano at Aim Italy to see if he can replicate it.
Again, I have sent an email to Stefano at Aim Italy to see if he can replicate it.