RichFL

Is there someplace I can go to get definitions of the various torque and engine power channels in the 991_911 ECU Model running on a GT4?

Thanks,

Rich

ProCoach

Reach out to Robbie Yeoman at AiM in Lake Elsinore California. He's the US based CAN engineer and probably has, or can get from Italy, that info.

I spoke to him this week about these measures on other protocols, and they have to do with the manufacturer's ECU mapping for fuel and ignition, based on temps, pressures, MAP, throttle load and a number of other factors.

Meaning, they are not accurate OUTPUT numbers, but rather what the manufacturer expects to see, at that moment and based on the ECU map. That map is generated by all other measures (some referenced above) required to build it.

RichFL

Thanks Peter, you're always very helpful and it's much appreciated.

Rich

Matt Romanowski

You can also talk to Tyler. He and Robbie share a lot of the CAN tasks and knowledge. I have to double check the address, but ecu@aim-sportline.com.is the ECU CAN team and can probably give you a detailed description.

RichFL

Thanks Matt.