AIM Brake Pressure Channel ID
#1
Pro
Thread Starter
AIM Brake Pressure Channel ID
I have my AIM Solo DL connected via the CAN Buss on my 2014 Cayman S (981).
At one time I was getting ' Relative Brake Pressure' on my video overlay but some reason I now have lost it. I thought I had selected PR1, PR2, PR3 or PR4 but none of them seem to provide analog brake pressure channel and subsequent display on my SmartyCam HD overlay.
Can anyone save me the time of selecting & testing.
Much appreciated . . .
At one time I was getting ' Relative Brake Pressure' on my video overlay but some reason I now have lost it. I thought I had selected PR1, PR2, PR3 or PR4 but none of them seem to provide analog brake pressure channel and subsequent display on my SmartyCam HD overlay.
Can anyone save me the time of selecting & testing.
Much appreciated . . .
#2
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 18,686
Received 2,842 Likes
on
1,673 Posts
PR4 is the channel to send 981 info to the SCHD.
#3
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 18,686
Received 2,842 Likes
on
1,673 Posts
PR4 is the channel to send 981 info to the SCHD.
The proper protocol for CAN is Porsche 991_981
The proper protocol for CAN is Porsche 991_981
#4
Pro
Thread Starter
Thanks ProCoach - I use 991_981 and it working fine as I recall at the beginning of our last track season but somehow I must had a 'brain fart' and lost it.
I'll set up the SCHD2 'Brake Pressure' data view to PR4.
Thanks again . . .
I'll set up the SCHD2 'Brake Pressure' data view to PR4.
Thanks again . . .