Notices

Vikings's Porsche 992- Paint correction, PPF, Nano coating, and Tint

Thread Tools
 
Search this Thread
 
Old 10-28-2019, 02:12 PM
  #1  
MoeMistry
Premium Sponsor
Rennlist
Site Sponsor

Thread Starter
 
MoeMistry's Avatar
 
Join Date: May 2006
Location: Southern California
Posts: 2,526
Received 756 Likes on 397 Posts
Thumbs up Vikings's Porsche 992- Paint correction, PPF, Nano coating, and Tint

The 992s are rolling into GP and this was the first one. Porsche has hit another one out of the park and we thoroughly enjoyed working on this Carrera S

Typical Delivery the way we like it





New-Car prep



We rinse the mitt after each panel to flush out the dirt before dunking back into clean soap bucket



Dry using soft and plush microfiber towel that's clean for every wash



Paint decontamination is done chemically AND physically. Old-school clay still is our preferred method as we can hear and feel the impurities









PPF Prep and Installation

While the paint correction is in process, our techs are busy customizing and printing patterns. Here's an example of the 992 front bumper. Areas in yellow will be the extensions. As you can see, the stock pattern, top left, has very few areas of "recommended" extensions. Our pattern, lower right, is near fully extended for a true semi-custom fitment with minimal trimming needed. This provides the accuracy and consistency of a plotted pattern, with similar fitment of a "custom" installation



Once paint correction is complete, this 992 needed minimal, we begin PPF installation by removing OEM stone guard that provides very little protection









Using XPEL DAP, we have two options...seam or seamless near washer nozzle. We opt for the seamless pattern that we've customized to our spec







Wrapped edges prior to tuck. It takes nearly 2-3X in labor to wrap nearly all edges...hence the cost difference between most installations





By wrapping most edges, we have a more sustainable product and much better to look at as well



Custom mirrors



Custom headlights...992 headlights are a bit more challenging than previous generations






Completed project























Thank you for checking this project out and please don't hesitate to share your thoughts or questions

Last edited by MoeMistry; 10-28-2019 at 02:34 PM.
The following 3 users liked this post by MoeMistry:
blk on blk (10-29-2019), BudgetPlan1 (10-31-2019), Porsche Lee (10-31-2019)
Old 10-28-2019, 02:14 PM
  #2  
LexVan
Banned
 
LexVan's Avatar
 
Join Date: Jan 2013
Location: Chicagoland Area
Posts: 26,141
Likes: 0
Received 5,411 Likes on 2,516 Posts
Default

U da man, Moe!
Old 11-01-2019, 12:06 AM
  #3  
SFOJAM
Instructor
 
SFOJAM's Avatar
 
Join Date: Aug 2019
Location: San Francisco Peninsula, CA
Posts: 138
Received 30 Likes on 24 Posts
Default

Just flawless. Strong work.
Old 04-17-2020, 09:59 AM
  #4  
MoeMistry
Premium Sponsor
Rennlist
Site Sponsor

Thread Starter
 
MoeMistry's Avatar
 
Join Date: May 2006
Location: Southern California
Posts: 2,526
Received 756 Likes on 397 Posts
Default




Time flies...she was back in for her semi-annual service this week and is holding up beautifully. Owner is doing a wonderful job of home care



Quick Reply: Vikings's Porsche 992- Paint correction, PPF, Nano coating, and Tint



All times are GMT -3. The time now is 04:28 PM.