Front Seat Removal - Should be easy?
#16
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Ive cleared the codes once already and then tried starting the car and then the 51 CODES have come back so these are 100% hard faults. I listed the important ones below, the top two are most concerning to me. This is what sparked me to try and get the seat out.
Gateway 00406 (Power Distributor, Pyrofuse Open Circuit)
AirBag B10151B (Battery Disconnect 12v - Resistance Too High)
AirBag B100661B & B10071B Belt Tensioner On Front Driver/Passenger Side Resistance Too High
AirBag B10091B Belt Tensioner Driver Side Rear Limit Exceeded
Airbag B102900 Crash Even, Rear Impact
AirBag B1071F0
So the car has obviously detected it was in an accident in the rear.
I appreciate all the feedback here guys.
Gateway 00406 (Power Distributor, Pyrofuse Open Circuit)
AirBag B10151B (Battery Disconnect 12v - Resistance Too High)
AirBag B100661B & B10071B Belt Tensioner On Front Driver/Passenger Side Resistance Too High
AirBag B10091B Belt Tensioner Driver Side Rear Limit Exceeded
Airbag B102900 Crash Even, Rear Impact
AirBag B1071F0
So the car has obviously detected it was in an accident in the rear.
I appreciate all the feedback here guys.
The following users liked this post:
K-Dog (12-26-2023)
#18
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
We have a winner. The seat belt is fully locked up. The pass. side as well. See, too dumb for my own good. Seats out now -_-.
The following 2 users liked this post by STI_MECE:
HETPE3B (12-21-2023),
luciano136 (12-21-2023)
#19
#20
#23