Quick PCM swap question.
Thread Starter
1st Gear
Joined: Apr 2012
Posts: 1
Likes: 0
Quick PCM swap question.
Hi everyone,
Really quick question, just purchased a PCM 2.0 (PCM2 E1 USA EC: 124
Model No.: BE 6636. Arriving next week
) to swap out my CDR-23 on my 04 Cayenne S, anyone can advise me a step-by-step DIY manual for that? Or at least tell if the PCM will actually fit or I'll need to purchase additional brackets and other hardware. Right now I'm at the point when I at least want it installed and playing radio and CD 's not expecting navi to work at all, I'm already hatin' myself for not doing any research before buying something off ebay >.<
Thanks in advance =)
Really quick question, just purchased a PCM 2.0 (PCM2 E1 USA EC: 124
Model No.: BE 6636. Arriving next week
) to swap out my CDR-23 on my 04 Cayenne S, anyone can advise me a step-by-step DIY manual for that? Or at least tell if the PCM will actually fit or I'll need to purchase additional brackets and other hardware. Right now I'm at the point when I at least want it installed and playing radio and CD 's not expecting navi to work at all, I'm already hatin' myself for not doing any research before buying something off ebay >.<Thanks in advance =)
Super Moderator
Needs More Cowbell
Lifetime Rennlist
Member
Needs More Cowbell
Lifetime Rennlist
Member
Joined: Mar 2002
Posts: 29,323
Likes: 17
Your local dealer's service department might be willing to print you out the Tequipment installation instructions, as this is/was an after sales Tequipment catalog part.
You could also try contacting Loren at Renntech. I would also suggest becoming a contributing member over there, since it will give you access to TSB's and other documentation.
Good luck.
You could also try contacting Loren at Renntech. I would also suggest becoming a contributing member over there, since it will give you access to TSB's and other documentation.
Good luck.
Rennlist Member
Joined: Jun 2010
Posts: 5,374
Likes: 969
From: The Poconos
Oh, man...
If you're going from a CDR-23 the world is your oyster. You can easily drop a state-of-the-art aftermarket system in there with no issues whatsoever. Resell that OEM brick on eBay and go find something decent.
Here's the thread I ran on replacing the CDR-23 in my '05: https://rennlist.com/forums/porsche-...completed.html
If you're going from a CDR-23 the world is your oyster. You can easily drop a state-of-the-art aftermarket system in there with no issues whatsoever. Resell that OEM brick on eBay and go find something decent.
Here's the thread I ran on replacing the CDR-23 in my '05: https://rennlist.com/forums/porsche-...completed.html
Last edited by Shawn Stanford; Apr 9, 2012 at 09:48 AM.
Three Wheelin'
Joined: Mar 2011
Posts: 1,899
Likes: 100
From: Roy, WA
You need to become a contributing member at www.renntech.org and you will have access to all of the TSB's.
