Installing CDR-23 in place of PCM 2.0... can it be done?
#16
Instructor
Thread Starter
Ah, wire 5? Its a white wire. No blue wires. And the 3 wires you mentioned are all part of socket A, so I can still leave socket C alone I guess...? Thanks!!
#19
Instructor
Thread Starter
Yep, I have a blue "ANT:POWER" wire on the android harness. So MOST ACC (red wire) goes to this one? So the headunit becomes the switched power?
#20
#21
Instructor
Thread Starter
I will run the ACC red wire from the headunit to a switched 12v source. And then just need to find where the orange "Illuminate" wire goes... lol
Thanks so much Jonathan. I've been reading your writeup all afternoon!
Thanks so much Jonathan. I've been reading your writeup all afternoon!
#25
orange illuminate... if it's spliced out of Android power harness that is the reverse signal for turning on backup camera.
You're very welcome. I made lots of progress on the instructional video edits today I was inspired by your enthusiasm lol
You're very welcome. I made lots of progress on the instructional video edits today I was inspired by your enthusiasm lol
#30
Instructor
Thread Starter
Clips for vent
Watching video now. Super helpful! Noticed at 5:30 in your video you simply pry the upper speaker vent off. Mine (06 Cayenne S) has 2 screws you have to unscrew first. Want to make sure folks dont just pry if it's like mine.
2 screws
ok, back to video...!
2 screws
ok, back to video...!