2002 S w/blown motor: On the road!
11-30-2009 | 12:39 PM
#46
Thread Starter
Rest In Peace Jaak
Cable Guy
Rennlist Member
Cable Guy
Rennlist Member
Joined: Dec 2002
Posts: 15,654
Likes: 3
From: Don Mills, Canuckistan
Has been busy on the weekend, started friday by getting it e-teated and safety cert. It past with flying colours according to the tester ... limit was 150 ppm, read 1 ppm.
I am getting used to it and putting the miles on her to break in the motor. With the resonator box removed, snorkel removed and the intake cleaned up a bit ... it has a nice growl between 3,000 to 4,000 rpm. I don't take it over 4k with the 30 weight oil. Man this is a nice ride ....
Pix as requested!
I am getting used to it and putting the miles on her to break in the motor. With the resonator box removed, snorkel removed and the intake cleaned up a bit ... it has a nice growl between 3,000 to 4,000 rpm. I don't take it over 4k with the 30 weight oil. Man this is a nice ride ....
Pix as requested!
03-31-2010 | 09:39 PM
#47
1st Gear
Joined: Mar 2010
Posts: 1
Likes: 0
This message is for Jaak Lepson:
Where did you get your engine rebuilt?
Can you provide me with the name and contact #?
The 2.5L engine on my 1999 boxster has just blown and I need a rebuild
Where did you get your engine rebuilt?
Can you provide me with the name and contact #?
The 2.5L engine on my 1999 boxster has just blown and I need a rebuild
Last edited by boxsterboxster986; 03-31-2010 at 09:41 PM. Reason: mistake
04-01-2010 | 09:42 PM
#49
Pro
Joined: Dec 2003
Posts: 561
Likes: 0
From: Baltimore Md.
