The in car video thread 2009
#46
Three Wheelin'
El Toro AFB, Irvine, CA - November 15th - PCA, Orange Coast Region
http://www.youtube.com/watch?v=qeZTS9yW6dc
Fantastic layout Dave! Keep up the long, fast sweepers!
http://www.youtube.com/watch?v=qeZTS9yW6dc
Fantastic layout Dave! Keep up the long, fast sweepers!
#48
Are we allowed to embed the vids into this post?
Well, here's one of my 951 right before I took her apart for the full race gear.
I highly suggest watching the HD version though.. easier to follow. It looks like I hit every cone.. I actually only hit one on this run.
31mm hollow Torsion bars. Fantastic difference. AND while I was in there, I was able to give the car the proper alignment it deserved. I can't believe I paid someone $100 for what I saw. SHAMEFUL. That's what I get for being lazy. - I honestly thought lasers could do better, but it's the monkey behind it I had to worry about.
http://www.youtube.com/watch?v=
I was the 3rd fastest CAR of the day. The other 3 faster times were motorcycle style carts. (so truly 6th fastest)
The camera shut off due to vibration.. I had it set to record on the hard drive, and not the card. It shuts down when it can't keep up.
this is only the 2nd Autocross with a new rear setup. Being the FASTEST car of the day is only a few events away. - 245 Khumo Victo's all the way around.
here's a link to the Classes. http://www.houscca.com/solo/results07/08REG10R.TXT
The double entry times are lower because of the PAX handicaps. PAX is retarded.
Speaking of retarded. I won my class because I was the only one in it. I think I would have won it anyway.
Here's some telemetry from Gtech pro RR. It's awesome. I can see I wasn't hitting the 2nd slalom as hard as the first. And that my braking is confirmed worse with the stiffer suspension. I need more rear bias. I was getting 1G braking. Now only .7-.8 Also. Lots of imformation here. The two graphs show how I was slower on one of the runs. (RED) Another interesting note.. Check out the acceleration G's. .8 at one point. Pretty cool traction to power on 245's that aren't wrinkle walls!
Well, here's one of my 951 right before I took her apart for the full race gear.
I highly suggest watching the HD version though.. easier to follow. It looks like I hit every cone.. I actually only hit one on this run.
31mm hollow Torsion bars. Fantastic difference. AND while I was in there, I was able to give the car the proper alignment it deserved. I can't believe I paid someone $100 for what I saw. SHAMEFUL. That's what I get for being lazy. - I honestly thought lasers could do better, but it's the monkey behind it I had to worry about.
http://www.youtube.com/watch?v=
I was the 3rd fastest CAR of the day. The other 3 faster times were motorcycle style carts. (so truly 6th fastest)
The camera shut off due to vibration.. I had it set to record on the hard drive, and not the card. It shuts down when it can't keep up.
this is only the 2nd Autocross with a new rear setup. Being the FASTEST car of the day is only a few events away. - 245 Khumo Victo's all the way around.
here's a link to the Classes. http://www.houscca.com/solo/results07/08REG10R.TXT
The double entry times are lower because of the PAX handicaps. PAX is retarded.
Speaking of retarded. I won my class because I was the only one in it. I think I would have won it anyway.
Here's some telemetry from Gtech pro RR. It's awesome. I can see I wasn't hitting the 2nd slalom as hard as the first. And that my braking is confirmed worse with the stiffer suspension. I need more rear bias. I was getting 1G braking. Now only .7-.8 Also. Lots of imformation here. The two graphs show how I was slower on one of the runs. (RED) Another interesting note.. Check out the acceleration G's. .8 at one point. Pretty cool traction to power on 245's that aren't wrinkle walls!
#49
Three Wheelin'
PCA-OCR Event - 12/6/09
Thanks Dave for an awesome track!
http://www.youtube.com/watch?v=ZeDT-wY9aVw
And here is a small clip show of me having some fun...
http://www.youtube.com/watch?v=z2A5QBy5Ziw
Thanks Dave for an awesome track!
http://www.youtube.com/watch?v=ZeDT-wY9aVw
And here is a small clip show of me having some fun...
http://www.youtube.com/watch?v=z2A5QBy5Ziw
#50
Instructor
Join Date: May 2004
Location: Vancouver, WA
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
#53
Instructor
Join Date: May 2004
Location: Vancouver, WA
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts