Notices
997 Turbo Forum 2005-2012
Sponsored by:
Sponsored by:

Thoughts and ideas on this spec please

Thread Tools
 
Search this Thread
 
Old 11-06-2007 | 11:09 PM
  #16  
ToffeGT2's Avatar
ToffeGT2
Track Day
 
Joined: Jun 2007
Posts: 21
Likes: 0
From: SF and Asia
Default

Originally Posted by khaosai
Hi,

thanks for the replies.

Some good ideas that i will be looking at. I like the gear lever trim and the door finishers in leather.

Will just go with the standard gearlever and handbrake as dont want to overdo the aluminium.

When realistically can we expect to see the new facelifted turbo on the market. Would hate to get the car in May, for it to then be facelifted soon after. Seems pretty quick for a facelift considering the cabrio is a fairly recent addition.

Rgds.


Since you are going to get the PCM package aluminium option, you should really consider getting the DAW rather than the standard gearlever and handbrake because with DAW you will get the sititching color matches the rest of the car and also paint part that I circle in red in silver too, MY08 DAW option will also include the CDZ option as a package unlike MY07. Double check this will your dealer.

Old 11-07-2007 | 01:23 AM
  #17  
atomic80's Avatar
atomic80
Pro
 
Joined: Oct 2003
Posts: 690
Likes: 12
From: Bellevue, WA
Default

Check out my interior.


I have these:

Dome light in leather
Sunvisors in leather
Door finishers in leather
Gear trim in leather
Steering column in leather
Rear center console in leather
Fuse panel in leather
Model logo compartment cover
ECA aluminum shift **** + ebrake handle
Techart type 1 steering wheel with CF
803 CF package

Works out beautifully. If I could do it all over again, I'd have added the PCM in aluminum look.

I would suggest adding the LSD and keeping the parking assist option. I find both useful.

If you wanted to get the same shifter/ebrake as mine then you'd have to go with option DAX but rumors have it that it might not be possible for you to get this option. Instead you'd only be able to get DAW as toffe suggested.
Old 11-12-2007 | 04:41 PM
  #18  
khaosai's Avatar
khaosai
Thread Starter
AutoX
 
Joined: Oct 2007
Posts: 10
Likes: 0
Default

Originally Posted by khaosai
Hi,

first post so go easy !.

Looking for tips, ideas, thoughts etc on the spec below for a turbo with a May 08 delivery. All feedback, good or bad welcome.

Arctic silver, manual. Black interior.

Adaptive sports seats.
Footrests in sports look.
Floor mats.

Park assist.
Sport shifter.
Sports chrono package.

Thicker 3 spoke sports steering wheel in leather.
Porsche crest on head restraints.
Rear section of centre console in leather.
Sun visors leather.
Rear view mirror leather.
Lid of storage bin with turbo logo.

PCM package aluminium look.
Sports seats backrests aluminium look.
Belt outlet B pillars aluminium look.

Red tailights.

Trying to select an aluminium handbrake but does not seem to allow that unless i go for the tiptronic option too. Any ideas on this ?.

Thought about silver/grey seatbelts but might be overdoing it a little.

Regards from Dubai.
Hi,

thanks for the latest ideas and thoughts.

Have till Jan before final spec.

Some changes/additions to the above:

Park assist to go.

3 spoke multi function steering wheel with Y trim in leather.

Lid of storage bin with porsche logo rather than turbo logo.

Silver/Grey seatbelts.

Gear lever trim leather.

Steering column casing leather.

Door finishers in leather.

Gear and aluminium levers in Aluminium. ( DAD )

Exterior colour will likely be arctic silver, however white is also a consideration having seen a few in the showroom.

Looking forward to the end product !.

Rgds.
Old 11-12-2007 | 05:39 PM
  #19  
blk on blk's Avatar
blk on blk
Three Wheelin'
 
Joined: Dec 2005
Posts: 1,502
Likes: 9
From: Houston, TEXAS!
Default

deviating stitching is a really nice upgrade imo. it would look great against the black interior.



Quick Reply: Thoughts and ideas on this spec please



All times are GMT -3. The time now is 05:24 PM.