MCS
Thread Starter
AutoX
Joined: Mar 2023
Posts: 11
Likes: 0
MCS
Hi,
I recently picked up gen 1 MCS 2 way suspension with compression and rebound adjustments for my 996 turbo.
Current setup:
150 PSI front and rear canisters
700# springs in front
900# springs in back
compression, 12 in front, 12 in rear
rebound, 15 in front, 16 in rear.
The car is setup primarily as a track car. Rear wheel drive with a guards LSD pushing about 600 wheel HP at 1.5 bar. When at speed it feels a little soft / bouncy in the the turns when there are undulations. Is anyone familiar or have suggestions with MCS suspension settings?
Thanks! Karim
I recently picked up gen 1 MCS 2 way suspension with compression and rebound adjustments for my 996 turbo.
Current setup:
150 PSI front and rear canisters
700# springs in front
900# springs in back
compression, 12 in front, 12 in rear
rebound, 15 in front, 16 in rear.
The car is setup primarily as a track car. Rear wheel drive with a guards LSD pushing about 600 wheel HP at 1.5 bar. When at speed it feels a little soft / bouncy in the the turns when there are undulations. Is anyone familiar or have suggestions with MCS suspension settings?
Thanks! Karim
