Cup Uprights on a 997-2 GT3RS
10-27-2020, 11:51 AM
#17
Agent Orange
Rennlist Member
Rennlist Member
Thread Starter
I suppose it's possible to make a few sets of these if there is enough interest. I'll have to look at the cost...
This post is 4 years old, I've made some changes to the original design, here is my current one:
This post is 4 years old, I've made some changes to the original design, here is my current one:
10-27-2020, 12:42 PM
#18
Definitely interested and in SoCal.
I suppose it's possible to make a few sets of these if there is enough interest. I'll have to look at the cost...
This post is 4 years old, I've made some changes to the original design, here is my current one:
https://www.instagram.com/p/CAdkOhnDvGF/
https://www.instagram.com/p/CAvJNAWFUBQ/
https://www.instagram.com/p/CEps3F2FoQA/
https://www.instagram.com/p/CD0FW83FZ0B/
https://www.instagram.com/p/CE1py3xFLfs/
This post is 4 years old, I've made some changes to the original design, here is my current one:
https://www.instagram.com/p/CAdkOhnDvGF/
https://www.instagram.com/p/CAvJNAWFUBQ/
https://www.instagram.com/p/CEps3F2FoQA/
https://www.instagram.com/p/CD0FW83FZ0B/
https://www.instagram.com/p/CE1py3xFLfs/
11-14-2020, 01:40 PM
#19
Interested in selling your earlier prototype versions?
I suppose it's possible to make a few sets of these if there is enough interest. I'll have to look at the cost...
This post is 4 years old, I've made some changes to the original design, here is my current one:
https://www.instagram.com/p/CAdkOhnDvGF/
https://www.instagram.com/p/CAvJNAWFUBQ/
https://www.instagram.com/p/CEps3F2FoQA/
https://www.instagram.com/p/CD0FW83FZ0B/
https://www.instagram.com/p/CE1py3xFLfs/
This post is 4 years old, I've made some changes to the original design, here is my current one:
https://www.instagram.com/p/CAdkOhnDvGF/
https://www.instagram.com/p/CAvJNAWFUBQ/
https://www.instagram.com/p/CEps3F2FoQA/
https://www.instagram.com/p/CD0FW83FZ0B/
https://www.instagram.com/p/CE1py3xFLfs/
11-14-2020, 08:15 PM
#21
Thoughts on mid or roof height??
demonspeed makes some taller ones as well:
https://www.demonspeedmotorsports.co...-997-A-WU7.htm
https://www.demonspeedmotorsports.co...-997-A-WU7.htm
Looks like mid height might work best as above??
11-15-2020, 05:30 PM
#22
Drifting
on a street car the standard RS height is fine. but on track you would want the wing to be higher so you can run less AOA with cleaner air. lots of people like the taller uprigts on the street so they can see out of the rear window (but that's never bothered me)
01-10-2021, 04:27 PM
#24
Cup end plates is great idea too 👍
Talker uprights and cup end plates would be sick. Getting more for group buy 👌