BBi Autosport Porsche 997.1 GT3 Project Bull Dog with 285 Wide Front Tires
#19
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
__________________
Bringing Passion, Artistry, Craft to the Porsche Tuning Industry
Southern California's Porsche Performance Tuning, Engine Development,
ECU Software Tuning, Custom Fabrication, Race Preparation & Factory Service Center
Website: www.bbiautosport.com Email: sales@bbiautosport.com Phone: (714) 843-0200
Follow Us On: Facebook & Instagram
Bringing Passion, Artistry, Craft to the Porsche Tuning Industry
Southern California's Porsche Performance Tuning, Engine Development,
ECU Software Tuning, Custom Fabrication, Race Preparation & Factory Service Center
Website: www.bbiautosport.com Email: sales@bbiautosport.com Phone: (714) 843-0200
Follow Us On: Facebook & Instagram
#20
Track Day
Love this thing! Perfection. IMO baddest white 997 GT3. I prefer v1 as it looks cleaner but to each their own.
On a side note, I haven's seen that MI logo in some time and now I am feeling old.
On a side note, I haven's seen that MI logo in some time and now I am feeling old.
#27
I used to run NT01 245/40 and 305/35s on 18x9x12s. Recently switched to NT01 275/35 and 335/30s on 18x10x13s. It's a substantially faster set up, 1.5 seconds quicker on a 2 minute lap and easier to drive at the limit. It's really a huge all around improvement. This is on a 996 but would correlate equally to 997s.
#28
Man, no matter what the 997.1 GT3 is so charismatic and beyond beautiful. IMO it is the most beautiful of them all. The stitch between the air cooled cars and the modern era cars.
#29
RL Community Team
Rennlist Member
Rennlist Member
Couple of questions:
What is the ride height of the BBI car
How did you determine that your LCA's are stronger than the MS version?
Where did you get the flairs for the front?
Thanks
Ray
What is the ride height of the BBI car
How did you determine that your LCA's are stronger than the MS version?
Where did you get the flairs for the front?
Thanks
Ray
#30
Rennlist Member
Originally Posted by rbahr
Couple of questions:
What is the ride height of the BBI car
How did you determine that your LCA's are stronger than the MS version?
Where did you get the flairs for the front?
Thanks
Ray
What is the ride height of the BBI car
How did you determine that your LCA's are stronger than the MS version?
Where did you get the flairs for the front?
Thanks
Ray