Hoyt

^^^ I'm really diggin' those seats!

Achtung964

Are those seats custom ordered directly from Recaro?

BBiAutosport

We can get them directly from Recaro.

BBiAutosport

2010 Porsche 997.2 GT3 4 Liter StreetCup Build







Upgrade List:

Engine
•New BBI 4.0L Fully Balanced (freshly broken in with 500 miles)
•Upgraded Rod Bolts
•Welded Coolant Lines
•BBi Cam Actuator Repair
•Cobb AP with Custom BBI Calibration Fully Dyno Tuned to 91 & 100 oct.
•50 State Legal BBI StreetCup Exhaust using a Titanium RS Muffler
•Light weight flywheel and 4.0L clutch set up (fully balanced)

Exterior
•GT3 Cup Fender Flares and Inner Liners
•Custom Carbon Fiber Decklid RS style
•OEM GT3 RS Rear wing and Risers

Suspension
•Full BBI StreetCup Control Arm Package (all of the goods)
•Ohlins Road and Track with BBI spring package
•Aggressive street/Track Alignment & Corner Balancing

Wheels & Tires
•Forgeline GA1R CL 10x19 Front & 12x19 Rear Wheels
•Michelin PSC2 265 front and 325 rear

Interior
•BBi StreetCup Roll Bar Gloss Silver
•BBi StreetCup Seat Base & Slider Kits
•RECARO Pole Positions Racing Seats

BBiAutosport

New redesigned BBi Autosport 996/997 Harness Bars now in stock. For ease of installation, we added 2 additional interlocking joints and a sweep in the main hoop for for clearance around the carpet and plastic underneath it all. As a result, it is one of the easiest bars to install on the market and no more damaged windshields or headliners.




- jerry@bbiautosport.com

BBiAutosport

SP Motorsports Pumpkin Porsche 997 GT3 RS BBi Street Cup Roll Bar Installation













SP Motorsports Contact Information:



1840 National Avenue
Hayward, CA, 94545 US
Phone: 510.782.0188
Fax: 510.785.8735
Email: info@spmsracing.com

BBiAutosport

Tomorrow, Friday July 6 will be the last day take advantage of our 10% holiday sale on this product!!!

Attachment 1349934

- jerry@bbiautosport.com

ex10psi

I purchased this variant a while back from bbi and I can attest to the ease of install. WAY easier than other bars where the footings do not bolt on/off trust me I've installed other bars. Why did it take so long for something like this to come out?!?!?! probably because most people are not idiots (like me) and just have a shop do the install. LOL.

BBiAutosport

Thank you very much for the testimonial!!!

BBiAutosport

BBi 4 Liter Porsche 997.2 GT3 Redesigned 996/997 Roll Bar, 991 GT3 OEM Sport Bucket Seats, CAE Shifter Install















- jerry@bbiautosport.com

BBiAutosport

BBi Autosport Racing Yellow Harness Bar & RECARO Automotive Seat Safety Package Self-Installed by Rennlist Member ex10psi. The client attested to the ease of install with the newly redesigned bars, "It is WAY easier than other bars where the footings do not bolt on/off. Trust me I've installed other bars. Why did it take so long for something like this to come out?"






- Jerry@BBiAutosport.com

ex10psi

Indeed this is my car and the bar install was super easy compared to traditional bars. Genius being able to remove the "footings" at the attachment points. No cutting carpet either, very clean and straightforward. I must also comment on the SY paint, it turned out very good and proves to be durable so far!

Sorry for the bad pics everyone. Jerry asked for better pics but my iphone photo skills are lacking at best. LOL

bmwtye

Which recaro seats are you using?

BBiAutosport

SP Motorsports Guards Red 997.2 GT3












- jerry@bbiautosport.com

BBiAutosport

Porsche 997.1 GT3 BBi Roll Bar & Cobra Racing IMOLA PRO-FIT Seat Install



[img]https://c2.staticflickr.com/8/7902/45914354765_dae50c1ced_h.jpg

To provide additional protection and proper restraint for weekend track days, we installed our BBi Autosport StreetCup Roll Bar into Mike's Porsche 997.1 GT3 along wit Cobra Racing IMOLA PRO-FIT racing seats mounted on our BBi Seat Base Kit. Here are some that we would like to share below.

Upgrades & Services Performed:

Safety

• BBi 996/997 StreetCup Bolt-In Roll Bar
• BBi Seat Base & Slider Kit
• Cobra Racing IMOLA PRO-FIT
• Schroth Profi II 6 Point Flexi-Belt Camlock Harness Set

BBi StreetCup 996 997 Roll Bar




Key Features

• Made from high strength seamless tubing (DOM) (1.5” x .120” main hoop & 1.5” x 0.95” rear hoops) for excellent strength to weight ratio
• TIG welded and utilizes “X” braces on both front and rear sections for superior strength and rigidity
• Mounts to front seat belt mounts and rear strut towers
• Utilizes laser cut mounting plates & inner diameter tube clamps that are CNC turned and milled for a precise and seamless fit
• Designed to work with stock or any aftermarket seats on the market
• Can be used with stock seat belts or 6 point harnesses for track use
• Designed to work with wrap-around style harnesses while optional eyelet bolt provisions are available for clip-in harnesses
• OEM fit & finish. The main hoop contours entire arch of the roof with an even 3/16 inch gap
• Finished in satin black powder coat. Other optional colors available
• Designed to fit all 996 & 997 non-cabriolet models including the Carrera, Turbo, GT2, and GT3
• Bolt-in installation requires no drilling and minimal carpet trimming
• Compatible with factory Bose subwoofer
• Made in USA

Cobra Suzuka Pro Seats



Cobra Imola Pro-Fit Kevlar race seat couples an unrestricted driving position (for easier ingress and egress) with the added strength and weight savings of Kevlar construction with full HANS® compatibility. The Cobra Imola Pro-Fit is covered in FIA compliant fire retardant, durable, and breathable 'Spacer' fabric incorporating anti-wear Suede-Tec patches at the arm and shoulder areas gives the Imola Pro-Fit hard-wearing good looks comfort, cooling, and safety.An unique Kevlar construction makes the Imola Pro-Fit seat infinitely stronger and 30% lighter than similar fiberglass seats at an ENTRY LEVEL PRICE below that of similar designed fiberglass seats. The Cobra Imola Pro-Fit seat is an excellent blend of composite performance and value.

Features:

• Side mounted only
• Available in standard or GT (+30mm width)
• Unique PRO-FIT custom padding system
• Full 6 Point harness facility
• Hans compatible
• Breathable Spacer fabric
• Optional Outlast cooling system
• Supplied with high tensile bolts pre-installed
• Integrated wear patches

BBi Seat Base & Slider Kit Porsche 996/997/991/987/981 Seat



The BBi Autosport race spec seat mounts are a direct bolt in to the factory mount location for a hassle free, easy installation for your competition race seat. The BBi Autosport Seat mounts have a large range of adjustment options allowing fitment for all major FIA and SFI approved seat brands and offers an integrated 5 and 6 point sub belt mounting location.The wide range of adjustment covers almost all possible seating preferences to properly seat drivers of all sizes. CAD designed, CNC laser cut and formed from one piece of .125” (1/8”) carbon steel with no welds to maximize strength and stiffness. All mounts are powdercoated with a wrinkle black base and satin black sides.

Features

• Precision CNC laser cut and bent from one piece of 1/8” 3mm carbon steel (base & side mounts)
• Multi way adjustability
• High strength sliders, mounts to base with 4 bolts per slider
• Integrated 5 and 6 point sub belt mounting locations
• Stylish design with laser cut BBi logo and durable satin black Powdercoat finish
• No modifications to vehicle or any seat mount components are required for installation
• Uniquely designed for Porsche vehicles for the best possible fitment
• Mounts to factory bolt locations with precise factory fitment
• Fits all major FIA/SFI approved seats up to 17”
• 14-3/4”¬(375mm) to 17-1/2”(445mm) width adjustments (standard side mounts)
• 16”¬(375mm) to 18-3/4”(445mm) width adjustments (optional wide side mounts)

Imola Seats Mounted on our BBi Seat Base & Slider Kit








Installed in Car






- Jerry@BBiAutosport.com