Bar wrap?
#6
Rennlist Member
I'm guessing it's this stuff:
http://www.jegs.com/i/ISC+Racer+Tape...FZRgfgodFpsAow
But I'd skip it and grab this instead:
http://www.turnermotorsport.com/p-14...lars-pair.aspx
http://www.jegs.com/i/ISC+Racer+Tape...FZRgfgodFpsAow
But I'd skip it and grab this instead:
http://www.turnermotorsport.com/p-14...lars-pair.aspx
#7
Rennlist Member
get these collars from McMaster Carr in either aluminum or delrin. I have the aluminum ones, they're nice. $12 each in 1 1/2" Look identical to those turner ones.
delrin or aluminum
http://www.mcmaster.com/#shaft-collars/=wwb0ca
delrin or aluminum
http://www.mcmaster.com/#shaft-collars/=wwb0ca
Trending Topics
#10
Rennlist Member
Not sure. Could grab a cheap harbor freight caliper to verify.
#11
#13
Instructor
Thread Starter
get these collars from McMaster Carr in either aluminum or delrin. I have the aluminum ones, they're nice. $12 each in 1 1/2" Look identical to those turner ones.
delrin or aluminum
http://www.mcmaster.com/#shaft-collars/=wwb0ca
delrin or aluminum
http://www.mcmaster.com/#shaft-collars/=wwb0ca
Thanks Bud! I ended up buying these today. Looks really clean on your bar and its functional!
#14
Three Wheelin'
Stupid question, should the collars go on the inside of harnesses or outside?