RedRSA

Following up on another thread: Any photos of wheel well screens and tips on fabrication and installation? I'd like to add them to mine to keep from tossing rocks and tire buggers into the backs of the radiators. It appears that the opening to the wheel liner can also be enlarged for increased air flow; has anyone looked into this?

Thank you.

bmwtye

Here you go. This is what I'm doing.

bmwtye

Another

John Chan

How did you frame it? I was vacuuming rocks today.

bmwtye

One bolt through the plastic in the top to hold it and one at the bottom.

Spyerx

His is way higher tech than my solution. :-) and looks better.
i got gutter screen at home depot for like $3
i cut it with tin snips
and zip tied it in
my inner ducts are CLEAN since installing these many, many track days ago.

see this thread:
https://rennlist.com/forums/997-gt2-...-radiator.html

scott40

Where can I get a pair of these!?

bmwtye

http://www.capitalcitymotorsports.co...sCarDriver.asp

RedRSA

Nice find! Thank you!

Jamie_GT3

Just made mine, when they're trashed, I'll get these, very nice...

scott40

Perfect. Thank you. Assuming install is just pulling the fender liner back and removing the frame to mount the screens?

LateBraking

bmwtye, how did you order those screens, just contact via email?

bmwtye

Yes just contacted them via email. Or you can call them up and ask for Gary. Real cool guy.

Let him know Tye sent you.

bmwtye

Thats one way I think you could do it. The easier way is do it when you replace your radiators.

LateBraking

Actually got through to him before I saw your response. Very, very cool guy indeed. Put my order in and gonna have it done along with the front screens and the pinning job/water pump/etc.

Hopefully I'll be headache-free for a long time to come thanks to the preventative stuff.