DME interpretation
12-03-2013, 09:39 PM
#1
DME interpretation
Range 1,3,4,5,6 --- ---
Range 2 4096 ---
590 hours, 19,300 miles
So....
Why no ignitions in range 1 with about 11 seconds worth in range 2?
Why no timestamp for range 2 ignitions?
TIA
Range 2 4096 ---
590 hours, 19,300 miles
So....
Why no ignitions in range 1 with about 11 seconds worth in range 2?
Why no timestamp for range 2 ignitions?
TIA
12-03-2013, 09:48 PM
#2
Rennlist Member
Get the whole printout. Doesn't make sense.
Ignition count in each of the ranges is accompanied by another number which is the hour when the last registered event occurred.
And you're right, can't go into Range 2 without tripping Range 1.
What car is this? 7-3?
Ignition count in each of the ranges is accompanied by another number which is the hour when the last registered event occurred.
And you're right, can't go into Range 2 without tripping Range 1.
What car is this? 7-3?
12-03-2013, 10:13 PM
#3
07 GT3RS
Although my experience with DME is limited, I thought there would be range 1 ignitions if there were range 2 and a time stamp associated with the number of ignitions in range 2. There isn't, only dashes. I'll try to scan and post.
Although my experience with DME is limited, I thought there would be range 1 ignitions if there were range 2 and a time stamp associated with the number of ignitions in range 2. There isn't, only dashes. I'll try to scan and post.