997 GT3 RS 4.1
06-02-2013 | 09:02 PM
#5
Rennlist Member
Joined: Jan 2008
Posts: 29,459
Likes: 1,718
From: S. Florida
Cool the front wheels match the orange on ethe 4.1 decal and the rears the grey on the same decals...
I see lots of cool stuff
'07GT3RS ==> .2RS conversion with CUP bumpers, deck lid, .1RS wing end plates, Barron wing uprights, CF dive planes, 4.0 look-a-like stripes, .2 Ti center muffler and 4.1 engine work :-)
I see lots of cool stuff
'07GT3RS ==> .2RS conversion with CUP bumpers, deck lid, .1RS wing end plates, Barron wing uprights, CF dive planes, 4.0 look-a-like stripes, .2 Ti center muffler and 4.1 engine work :-)
Last edited by TRAKCAR; 06-03-2013 at 12:39 PM.
Trending Topics
06-03-2013 | 11:52 AM
#9
Rennlist Member
Joined: Sep 2009
Posts: 3,581
Likes: 387
From: Driver's Seat
Such a weird pairing of colors, rims and offsets that I guess it's a development car from one of the tuners? That's a continental european plate carrier so the stateside excitement will have to wait...
06-03-2013 | 01:23 PM
#11
Rennlist Member
Joined: Sep 2009
Posts: 3,581
Likes: 387
From: Driver's Seat
Mad kudos to anyone who'd take a 4.0 and subject it to the treatment of a project car. Bit of a waste, but if the result is one killer track machine this side of a cup car, the ends might justify the means...
06-03-2013 | 04:57 PM
#13
Rennlist Member
Joined: Aug 2001
Posts: 14,160
Likes: 263
From: san francisco
Looks like a 3.8 rs with those front fender covers. 4.0 rs is not bolted on like that. But who knows. Tuners have $$ to do a conversion so it's plausible it could be a 4.0 but if u going to to such a conversion why not 4.3? Mike
06-03-2013 | 05:24 PM
#15
Thread Starter
Advanced
Joined: Oct 2011
Posts: 74
Likes: 0
From: Sweden
more pix with right combo
Attachment 733332
Attachment 733333
INFO
It is a 997 GT3 RS -08
with much cup parts
Engine 4.1 L RSR crank and 3.9 cylinders
GT3 R intake" plenum" and 4.0 airbox
cargraphic cams
Akra systems
Software and braked by RS Tuning in Germany
8:32 final drive
SQS gear systems
cargrapihic lightweight carpet + door sides
Carbon fiber trunk lid
sharkwerks uprights
BBS 13 * 19 and 10 * 19
Michelin 345 * 19 and 265 * 19
PFC brakes front and back
RSS wishbones, Dogbones, Toe, Engine
Tilton clutch
Öhlin shocks
and more and more
Attachment 733333
INFO
It is a 997 GT3 RS -08
with much cup parts
Engine 4.1 L RSR crank and 3.9 cylinders
GT3 R intake" plenum" and 4.0 airbox
cargraphic cams
Akra systems
Software and braked by RS Tuning in Germany
8:32 final drive
SQS gear systems
cargrapihic lightweight carpet + door sides
Carbon fiber trunk lid
sharkwerks uprights
BBS 13 * 19 and 10 * 19
Michelin 345 * 19 and 265 * 19
PFC brakes front and back
RSS wishbones, Dogbones, Toe, Engine
Tilton clutch
Öhlin shocks
and more and more
Last edited by 997 GT3 RSweden; 07-13-2014 at 07:57 PM.