Looking for ten minutes with a 2009-2011 997.2 GT3 or RS around RDU tomorrow
#1
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Thread Starter
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,079
Received 3,237 Likes
on
1,856 Posts
Looking for ten minutes with a 2009-2011 997.2 GT3 or RS around RDU tomorrow
No, I don't want to drive it!
It would be helpful if the test subject would drive around the block for me, though...
I need to plug my AiM Solo DL (with a new protocol) in to test for substantial improvements over OBD-II. Need to do this tomorrow, Thursday 12/13, if at all possible.
Please PM me. TIA, Peter
It would be helpful if the test subject would drive around the block for me, though...
I need to plug my AiM Solo DL (with a new protocol) in to test for substantial improvements over OBD-II. Need to do this tomorrow, Thursday 12/13, if at all possible.
Please PM me. TIA, Peter
__________________
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
-Peter Krause
www.peterkrause.net
www.gofasternow.com
"Combining the Art and Science of Driving Fast!"
Specializing in Professional, Private Driver Performance Evaluation and Optimization
Consultation Available Remotely and at VIRginia International Raceway
#3
No, I don't want to drive it!
It would be helpful if the test subject would drive around the block for me, though...
I need to plug my AiM Solo DL (with a new protocol) in to test for substantial improvements over OBD-II. Need to do this tomorrow, Thursday 12/13, if at all possible.
Please PM me. TIA, Peter
It would be helpful if the test subject would drive around the block for me, though...
I need to plug my AiM Solo DL (with a new protocol) in to test for substantial improvements over OBD-II. Need to do this tomorrow, Thursday 12/13, if at all possible.
Please PM me. TIA, Peter
#4
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Thread Starter
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,079
Received 3,237 Likes
on
1,856 Posts
#5
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Thread Starter
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,079
Received 3,237 Likes
on
1,856 Posts
Thanks, Dell. Was with a .1 this morning. Need a .2 GT3, GT3 RS or 4.0 only.
What we found was that the 2009-2011 GT3, GT3 RS 3.8 and 4.0 STILL has the Bosch ECU of the .1, which has the slower throughput on OBD-II. This new protocol will fix that, but I need a sample file to send to Italy.
What we found was that the 2009-2011 GT3, GT3 RS 3.8 and 4.0 STILL has the Bosch ECU of the .1, which has the slower throughput on OBD-II. This new protocol will fix that, but I need a sample file to send to Italy.
#7
Addict
Rennlist Member
Rennlist Member
Eddie has the SoloDL to ODB-2 cable, so he can be the crash test dummy. Open a GotoMeeting, share Eddie's PC, take control, configure, send the dummy to test, get results. Easy.
Trending Topics
#9
Rennlist
Basic Site Sponsor
Basic Site Sponsor
Thread Starter
Join Date: Jun 2008
Location: Durham, NC and Virginia International Raceway
Posts: 19,079
Received 3,237 Likes
on
1,856 Posts
Peter, yours and Randy's deal is much easier. I send you a file, you save it to your SD card, stick it in the VVBL and you're done. Might need to reload Grady's killer 8-in-one scene, then send me a file and I will see all the channels and so can you.
Eddie, Rad. Let's do this tomorrow if you have time. If Eddie has that cable, that is what we are going to test on the late cars... No more cutting wires.