2010 GT3 CL recall, a NEW recall
#556
Racer
Dealer will tighten CL while it is on the ground and I saw this in two different dealers, when I said the car must be on air they didn't believe until I show them the document.
Don't trust them or any body but yourself when it comes to CL work.
Don't trust them or any body but yourself when it comes to CL work.
#557
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
^ i said this MANY times. the system itself is fine, if you follow rules. but we dont follow rules. witness the dealer. and walk aroudn the track nex time you are out. you be surprised with what you see. thus as a manufacturer, they need to make things that are idiot proof. if a five year old cannot get it rigth 100% of the time, it's too hard and **** will and has happened.
#559
Rennlist Member
I have opinions about the CL's…
#562
Racer
damage after recall
Its so great that is not enough that this intrusive recall exists, then the dealers factory certified GT-3 technician damages your car and then denies it.
#563
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
this is way i always use wheel studs. even with 5 bolts i convert to LOOOOOOOOOONG STUDS. 105MM. my wheels clear the caliper first before falling off the studs.
sorry to see the scratches on caliper. that's very careless on their p art.
sorry to see the scratches on caliper. that's very careless on their p art.
#564
Rennlist Member
ironically in the 7.1 cars (with PCCB) they provided two "pegs" that you could screw into the hub to avoid hitting the PCCB's with the wheel when (un)mounting them ... with the 7.2's they also provided these same pegs, which are useless with CLs ...
the sliver lining (I hope) is that the dealer did not chip your PCCB rotors...
the sliver lining (I hope) is that the dealer did not chip your PCCB rotors...
#565
Rennlist Member
BTW for the record which dealership f**ked your calipers and resfused to make good?
#566
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
larry is right
studs essentially do same thing as those alum pegs.
studs essentially do same thing as those alum pegs.
#567
Rennlist Member
#568
Rennlist Member
I hope you checked the edge of your rotors to ensure they were not chipped in the process!
#569
Racer
Happened at Rector in burlingame . Dennis Dolen = should be terminated for he total lack of caring, told me customer service does not matter, go someone else, they would NOT replace them (only repair), insult after insult.....finally agreed to replace them. The technician could care less..he's a good friend of Jerry Woods. I would never expect this . Makes you wonder what happens to your car after you drive off. Oh finally both managers agreed that my car was just "another car"....nothing special ... Got it Rector. NEVER again will I ever step foot in that store.
#570
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
rector another bad shop
yes ur car is just another car, one that Dennis Dolen will not likely to b able to afford. tell him that.
this type of attitude is not acceptable.
I will wipe my customer a** when asked to. service is service
I prefer stead motors and Fremont Porsche. both are far from me. stead is 50 miles out. but they know service.
yes ur car is just another car, one that Dennis Dolen will not likely to b able to afford. tell him that.
this type of attitude is not acceptable.
I will wipe my customer a** when asked to. service is service
I prefer stead motors and Fremont Porsche. both are far from me. stead is 50 miles out. but they know service.