997.2 GT3RS Dive plane install
03-22-2012 | 12:37 PM
Thread Starter
Joined: Feb 2012
Posts: 443
Likes: 0
From: South Florida
997.2 GT3RS Dive plane install
03-22-2012 | 12:54 PM
Joined: Oct 2002
Posts: 25,836
Likes: 3,642
From: S.F Bay Area
here is a template I derived from some pictures of the DPs... this results in an installation which is "approximately" the same as these dimensions... (front is 10mm lower)
Attached Images
03-22-2012 | 01:02 PM
AddictRennlist Member Rennlist
Joined: Oct 2002
Posts: 7,427
Likes: 85
From: san jose, california
I'll need to use that larry... got some for mine too:P
03-22-2012 | 01:06 PM
Joined: Oct 2002
Posts: 25,836
Likes: 3,642
From: S.F Bay Area
Quote:
Originally Posted by
sharkster
I'll need to use that larry... got some for mine too:P
I will bring it over, although it looks as though I got the front dimension short by 10mm
03-22-2012 | 02:31 PM
Admin
Joined: Dec 2001
Posts: 11,010
Likes: 127
From: Athens
Larry, if I send you a 6RSR pic can you calculate the position for a near zero angle of incidence? I am about to install my canards..
03-22-2012 | 10:46 PM
Joined: Aug 2011
Posts: 3,665
Likes: 0
From: 6feet under snow of CANADA
03-23-2012 | 08:11 AM
Joined: Feb 2006
Posts: 13,684
Likes: 1,912
From: Wishing I Was At The Track
Same location/template for the larger dive planes?
Attached Images
03-23-2012 | 10:18 AM
Joined: Mar 2004
Posts: 4,271
Likes: 30
From: Left Coast, Florida
You should probably spend some more time on which adhesive to use as I saw one fly off at the track recently
03-23-2012 | 12:34 PM
Joined: Oct 2002
Posts: 25,836
Likes: 3,642
From: S.F Bay Area
Quote:
Originally Posted by
deputydog95
You should probably spend some more time on which adhesive to use as I saw one fly off at the track recently
OEM or aftermarket?
03-23-2012 | 12:36 PM
Joined: Oct 2002
Posts: 25,836
Likes: 3,642
From: S.F Bay Area
Quote:
Originally Posted by
911SLOW
Larry, if I send you a 6RSR pic can you calculate the position for a near zero angle of incidence? I am about to install my canards..
those poor ducks!
03-23-2012 | 01:16 PM
Joined: Mar 2004
Posts: 4,271
Likes: 30
From: Left Coast, Florida
Quote:
Originally Posted by
Larry Cable
OEM or aftermarket?
The extremely overpriced OEM ones. They did manage to pick it up, however it was in 13 pieces
03-23-2012 | 06:13 PM
Joined: Dec 2010
Posts: 3,501
Likes: 1
From: South Florida
Quote:
Originally Posted by
deputydog95
You should probably spend some more time on which adhesive to use as I saw one fly off at the track recently
Body shop mistake. Customer got a brand new one.
As long as the area is cleaned with alcohol or any adhesive cleaner that doesn't leave residues, it will be fine.
03-23-2012 | 06:14 PM
Thread Starter
Joined: Feb 2012
Posts: 443
Likes: 0
From: South Florida
Quote:
Originally Posted by
Nizer
Same location/template for the larger dive planes?
Let me verify that for you.
Thank you
03-23-2012 | 06:15 PM
Joined: Oct 2002
Posts: 25,836
Likes: 3,642
From: S.F Bay Area
Quote:
Originally Posted by
M3EvoBR
Body shop mistake. Customer got a brand new one.As long as the area is cleaned with alcohol or any adhesive cleaner that doesn't leave residues, it will be fine .
+1 warming the surface of the bumper 1st also helps it adhere...
03-23-2012 | 06:25 PM
Joined: Mar 2004
Posts: 4,271
Likes: 30
From: Left Coast, Florida
Why not just bolt these on to the bumper instead?
03-22-2012 | 12:37 PM
997.2 GT3RS Dive plane install
