pete95zhn

What would be the best place to cut openings for external shock canisters? I do not have dry release / quick disconnect thingys, so holes need to be 2" (50mm) in diameter.
The cage will be installed in near future and canisters attached to it.

Mark to picture pls! (If you don't have pictures of installation...)

Sorry, wrong forum....

Land Jet

Pete, my tech ran the quick connect hoses through grommets that were already in the body. Check for them. Why would you need 2" holes?

pete95zhn

I do not have dry release / quick disconnect thingys and the canister is about 50mm in diameter.

FFaust

Instinctively, I would think that opening up an existing hole to 2" would be best?

mobonic

Best place is behind where the rear seat buckets are: then have the holes covered in order to pass tech as you opened the firewall.

I look for pics of how we did it on my car

pete95zhn

Thanks!