NVRANUF

Thanks Chris, I'll let you know.

NVRANUF

Only the Sport I and Pro come in 30 deg..... for us big(ger) guys.

I'll check out the Sport I in Lrg and 30 deg, as Chris suggested.

lopro

what other angles do they carry if not the 30degree version?

Hanz II comes in certain sizes only ~ I was told. Does anyone know ?

1gunner thanks for posting this info.

Space Coast GT3

lopro, the anchors come with the Hanzs. One set. You specify if you want the quick release or the standard release. Quick release has two stings that hang down. They rest over the front of your shoulder. If you need to disconnect then you only have to reach up to the top of your chest and pull the straps. With the standard posts you have to reach up to your helmet, and behind you, to slide the Hanzs strap back towards the rear. If your helmet is not predrilled for Hanzs then you have to drill the holes. Instructions are included. Most helmet vendors will also sell you anchors and install them. Think the average price is $55. But your Hanzs will come with anchors in the box.

FFaust

Peter, I got the Sport II last year. A bit more $$ but the same certification as the I and Pro + rounded edges.

Canadian Motorsports Expo is being held this weekend in Toronto, and there are a lot of good buys to be had. Purchased my HANS there and saved the GST.

You can also get the cf if you want bling

Space Coast GT3

Oops, meant Hans. Here is a link to a sizing chart:

http://www.apexperformance.net/cartg...s%20device.asp

lopro

Thanks for your post/info. - Nice link

Great info for anyone interested in buying.









http://www.rallysport.ca/safety/prod...ing_tether.gif

aero997c2s

Just got my post anchors installed and bought new teathers today at OG. Was 100 total

lopro

I was looking in the bottom of my helmet box and they are sitting there hiding from me.

I guess I have a set of post anchors - Just need the hanz.

Where are you guys buying them in canada? brokerage& customs fees are getting abit tiring

http://www.speedmerchants.com/collections/hans-device-1

they dont carry the sport II

Gunner1 where are you getting yours?

NVRANUF

Thanks Francois, my only concern is that the Sport II doesn't come in a 30 deg fitting... which is recommended for those of us over 200lbs.

The extra savings from "NOT" splurging on CF bling will be put into a new SA 2010 helmet... looking at Stilo ST4 GTW.

Crazy Canuck

For those of you on the fence, I find driving with the Hans more comfortable than not wearing it as the shoulder straps don't dig into my collarbone. Add in the safety benefit and wearing one becomes a no brainer.

Oh and you MUST get the sliding tethers. The fixed are a PITA.

mdrums

You all should really look at Safety Solutions R3 Rage. Especially those of you that instruct in 3 point belt students cars. The R3 can be used in either 6 point harness or 3 point road car seat belts. This is really the best piece for drivers like us.

malmasri

+1 on safety solutions pro....I sold my Hans last year for this one...much safer on track IMO.
http://www.usracegear.com/product/SS-SAF.HR.50

FFaust

@ Lopro: I got mine from CSC Racing www.cscracing.com They seem to be one of the bigger importers/sellers of HANS devices in the GTA.

I think that they all come with sliding tethers now.

lopro

right on, thats where I bought my helmet.
I will have to ask them about the hanz also.