Centerlocks - I'm out! ....Hello 5-lug conversion!
09-30-2019, 08:24 PM
#468
Rennlist Member
Ok...
Start of project:
Carriers Out:
Carriers cleaned and prepped for new bearings and hubs:
and my assistant and photographer to document the process:
This is like a 4-6 week project for me, so won’t be updating for a bit... still waiting for hubs and bearings to arrive.
Start of project:
Carriers Out:
Carriers cleaned and prepped for new bearings and hubs:
and my assistant and photographer to document the process:
This is like a 4-6 week project for me, so won’t be updating for a bit... still waiting for hubs and bearings to arrive.
The following users liked this post:
Nugget (09-30-2019)
10-01-2019, 11:34 AM
#470
Rennlist Member
18 inch 5 lug wheels
Does anyone have a list of 18” 5 lug wheels that fit the 7.2 GT3? I’m running CCW’s and was looking for something lighter!Thanks in advance HOM
10-01-2019, 09:43 PM
#471
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
^ no official list per se
but BBS e88
BBS monoblock
Forgeline GA1a or GA1R, actually Forgeline can make whatever you like
but BBS e88
BBS monoblock
Forgeline GA1a or GA1R, actually Forgeline can make whatever you like
10-02-2019, 12:34 AM
#472
Rennlist Member
Thread Starter
Yes, love my Forgelines .... these are GA3R's in 19 inch sizes (below).......they are custom made to suit and can be spec'd for 18" sizes and clear 380mm OEM brakes .
10-21-2019, 02:36 PM
#474
Rennlist Member
Progress made. The GTS is now 5 lug. All hubs back in the car now and just waiting for a few suspension bits to arrive before going in for a full alignment and 4 corner balance late next week.
The following users liked this post:
Nugget (10-21-2019)
The following 3 users liked this post by PJP13:
10-27-2019, 11:47 PM
#476
Racer
11-20-2019, 01:59 PM
#477
Very interesting post! I'm thinking about doing the conversion on my 997.2 RS as well.
Just one question, is the 997.2 drive shaft plug and play with the 997.1 wheel hub? Or do I need to get a 997.1 drive shaft?
Thank you for the answer!
CheeRS
Max
Just one question, is the 997.2 drive shaft plug and play with the 997.1 wheel hub? Or do I need to get a 997.1 drive shaft?
Thank you for the answer!
CheeRS
Max
11-20-2019, 02:12 PM
#478
Rennlist Member
Thread Starter
01-20-2020, 05:01 PM
#480
Burning Brakes
delete
Last edited by 405; 07-19-2020 at 05:19 PM.