PFC08 Brake Info
#16
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The bullet point is...?
This combo of rotor and pad is looking like 16 track days with one flip and no fade? How many track days on a rotor before it dies?
I know it is asking a lot but I would love to know the weight of the pad/rotor/hat combo for this set up. Anyone willing to share that would earn hero status with me forever![thumbup](https://rennlist.com/forums/graemlins/thumbup.gif)
Thanks guys!
This combo of rotor and pad is looking like 16 track days with one flip and no fade? How many track days on a rotor before it dies?
I know it is asking a lot but I would love to know the weight of the pad/rotor/hat combo for this set up. Anyone willing to share that would earn hero status with me forever
![thumbup](https://rennlist.com/forums/graemlins/thumbup.gif)
Thanks guys!
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
#17
Nordschleife Master
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The bullet point is...?
This combo of rotor and pad is looking like 16 track days with one flip and no fade? How many track days on a rotor before it dies?
I know it is asking a lot but I would love to know the weight of the pad/rotor/hat combo for this set up. Anyone willing to share that would earn hero status with me forever![thumbup](https://rennlist.com/forums/graemlins/thumbup.gif)
Thanks guys!![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
This combo of rotor and pad is looking like 16 track days with one flip and no fade? How many track days on a rotor before it dies?
I know it is asking a lot but I would love to know the weight of the pad/rotor/hat combo for this set up. Anyone willing to share that would earn hero status with me forever
![thumbup](https://rennlist.com/forums/graemlins/thumbup.gif)
Thanks guys!
![Cheers](https://rennlist.com/forums/images/smilies/beerchug.gif)
Do you really want me to go in the garage and weigh pads....LOL. I want hero status.......3 lbs 8 oz per front side set of pads. This is for the 19mm thick pads
Havn't killed a rotor yet, they are at 11 days / 1247 miles so far.
#19
Nordschleife Master
Thread Starter
#23
#25
Race Director
#28
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
So its ok to run the PFC08 with the factory steel rotors??
I noticed the pedal is mushy with the pagid, compared to the factory PCCB. It actually made me question if I had a brake problem after my conversion from PCCB to factory steel rotors and paged R29 so I re-bled and found no air in lines. Running SRF brake fluid.
Oh I miss those days on the track with PCCB but I am not going to miss the potential cost of PCCB replacement.
Thanks for the help and the feedback guys on the brakes.
I noticed the pedal is mushy with the pagid, compared to the factory PCCB. It actually made me question if I had a brake problem after my conversion from PCCB to factory steel rotors and paged R29 so I re-bled and found no air in lines. Running SRF brake fluid.
Oh I miss those days on the track with PCCB but I am not going to miss the potential cost of PCCB replacement.
Thanks for the help and the feedback guys on the brakes.
#29
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
So its ok to run the PFC08 with the factory steel rotors??
I noticed the pedal is mushy with the pagid, compared to the factory PCCB. It actually made me question if I had a brake problem after my conversion from PCCB to factory steel rotors and paged R29 so I re-bled and found no air in lines. Running SRF brake fluid.
Oh I miss those days on the track with PCCB but I am not going to miss the potential cost of PCCB replacement.
Thanks for the help and the feedback guys on the brakes.
I noticed the pedal is mushy with the pagid, compared to the factory PCCB. It actually made me question if I had a brake problem after my conversion from PCCB to factory steel rotors and paged R29 so I re-bled and found no air in lines. Running SRF brake fluid.
Oh I miss those days on the track with PCCB but I am not going to miss the potential cost of PCCB replacement.
Thanks for the help and the feedback guys on the brakes.
I went to PBIR on Monday and it was easy to make the Pagids fade there, even SRF cook, but no problem with PFC. Pedal height is also way more even.
I did add front brake cooling, so that might be a factor as well, but I think it is 90% pads not so much rotor or cooling.