997 clubsport roll cage FIA papers?
#1
Thread Starter
Rennlist Member
Joined: May 2008
Posts: 17,108
Likes: 259
From: Somewhere in a galaxy far, far away....
997 clubsport roll cage FIA papers?
Anybody have or know of paperwork stating the clubsport roll cage meets FIA standards?
My german is rusty and i do not know who to contact at porsche motorsports for documentation to state my roll bar is FIA approved.
I need approval for something i am thinking about doing with the car.........
My german is rusty and i do not know who to contact at porsche motorsports for documentation to state my roll bar is FIA approved.
I need approval for something i am thinking about doing with the car.........
#3
Thread Starter
Rennlist Member
Joined: May 2008
Posts: 17,108
Likes: 259
From: Somewhere in a galaxy far, far away....
i have the 997.1 cage, but im going to buy a 997.2 front for the additional door bar so im PCA legal. So both would be nice.
I can run my RS in PCA stock class using the clubsport package as long as it is FIA approved and optioned by Porsche.
#4
Then it's all good, make sure that the shop that sells it, includes the certificate.
It comes with every cage.
If they don't I 'll find you a copy and hope that they 'll accept it.
It comes with every cage.
If they don't I 'll find you a copy and hope that they 'll accept it.
#5
Thread Starter
Rennlist Member
Joined: May 2008
Posts: 17,108
Likes: 259
From: Somewhere in a galaxy far, far away....
The cage was imported by FVD, however the shop that installed it probably discarded the paperwork or it was not present in the shipment from FVD.....
if you dig anything up it would be greatly appreciated.
#6
Thread Starter
Rennlist Member
Joined: May 2008
Posts: 17,108
Likes: 259
From: Somewhere in a galaxy far, far away....
#7
Searched my computer but I can't find the DMSB/FIA approval for the 7.1 cage.
I found the one for the mk1 GT3 and I have the original from the 2004 GT3..
Too many files and not good enough organizational skills.
I 've asked Gert maybe he has kept a copy from one of the cages he sold.
I found the one for the mk1 GT3 and I have the original from the 2004 GT3..
Too many files and not good enough organizational skills.
I 've asked Gert maybe he has kept a copy from one of the cages he sold.
Trending Topics
#8
Gert told me that the cages come without the papers. Very strange.
Perhaps they are not DMSB approved anymore? Maybe after IVM changed hands? I don't know.
You could try to contact the manufacturer directly and ask for the DMSB certificate, but bear in mind they are not very helpful on the telephone..
Semcon / IVM Bad Friedrichshall GmbH
Bergrat-Bilfinger-Straße 5
74177 Bad Friedrichshall
Phone +49 7136 9990
The part numbers for the cage are:
rear : 997 580 986 02 superseded to 05
Perhaps they are not DMSB approved anymore? Maybe after IVM changed hands? I don't know.
You could try to contact the manufacturer directly and ask for the DMSB certificate, but bear in mind they are not very helpful on the telephone..
Semcon / IVM Bad Friedrichshall GmbH
Bergrat-Bilfinger-Straße 5
74177 Bad Friedrichshall
Phone +49 7136 9990
The part numbers for the cage are:
rear : 997 580 986 02 superseded to 05
#9
[QUOTE=tcsracing1;8547014]Thanks!
The cage was imported by FVD, however the shop that installed it probably discarded the paperwork or it was not present in the shipment from FVD.....
Were you happy with FVD? Any recommendations for when I purchase my rollbar?
The cage was imported by FVD, however the shop that installed it probably discarded the paperwork or it was not present in the shipment from FVD.....
Were you happy with FVD? Any recommendations for when I purchase my rollbar?
#11
Thread Starter
Rennlist Member
Joined: May 2008
Posts: 17,108
Likes: 259
From: Somewhere in a galaxy far, far away....
FVD did a good job in getting me the cage from porsche motorsports in germany.
[QUOTE=Porro;8613264]
[QUOTE=Porro;8613264]
#12
Tom - if you need, my 997.2 CS cage should be arriving in the next week or so to Fordahl in Seattle. As I mentioned to you at the track, I can get that scanned or just sent over to you. I'll PM you my e-mail address.