997.1RS performance parts upgrade part 1
#47
GT3 player par excellence
Lifetime Rennlist
Member
Lifetime Rennlist
Member
#48
Rennlist Member
my second RS #2356 has been bone stock up until now.
CUP bumper screens
CUP front splitter
clear side markers
Bilstein damptronic shocks
GMG sway bars
GMG thust arm bushings
Tarrett monoball ends
Tarrett monoball upper/lower bearings
Tarrett rear upper control arms
Tarrett toe link with bump steer
Tarrett rear monoball shock mounts
ERP RSR tension/compression links
ERP rear toe control arm
ERP front tie rod with bump steer
more to come in part 2........
CUP bumper screens
CUP front splitter
clear side markers
Bilstein damptronic shocks
GMG sway bars
GMG thust arm bushings
Tarrett monoball ends
Tarrett monoball upper/lower bearings
Tarrett rear upper control arms
Tarrett toe link with bump steer
Tarrett rear monoball shock mounts
ERP RSR tension/compression links
ERP rear toe control arm
ERP front tie rod with bump steer
more to come in part 2........
The next stage for me will be the suspension. I really don't understand nor know which to do next and will be relying heavily on my mechs for this (luckily they are the same guys that support a top level Cup car racer here in Asia).
The suspension/alignment set up I will be going for will be very track specific as I rarely use the car on the roads,but only need to drive it to the track some 280km away. As such I don't mind a tough suspension set up as long as it keeps the car handling the way I want it on the track (I do need the creature comforts inside the car though including carpetting and stereo and aircon- talk about an oxymoron. Will wait for my next bonus before committing to the further development of my RS though...