Jms1

Sorry to revive this thread gents but I am trying to obtain the part number for the CLA option wheel with yellow centre stripe (as shown in the OP's picture).

The Suncoast part reference quoted previously appears to be for a plain Alcantara wheel.

Can anyone please share?

Thanks.

Larry Cable

lemme check, I managed to capture one of these unicorns a while back from Suncoast when they had one that someone had ordered but not subsequently purchased...

time was, and rumour has it, you had to have an RS VIN# that had CLA option already in order to order ...

going to rummage in the garage and see what I can come up with...

Larry Cable

p.s is that your mint GT3 in your avatar?

Jms1

Thanks Larry. Much appreciated and yes that's my car in my avatar.

Larry Cable

its gorgeous ... and talking a lap of the Ring as well! - good man!

I thought the box it came in had the p/n on the outside (since I keep my old wheel in there) but it doesn't (well the shipping label was pasted over the Porsche parts label) so short of pulling out my airbag module I doubt I will be
able to find it for you

Jms1

No problem and thanks so much for looking in the first place.

Don't get over to the Ring much these days but that photo brings back some good memories for sure! Love the car to bits too.

Larry Cable

this is the wheel you are looking for right:



this is the one I have... trying to find the p/n for you

https://www.suncoastparts.com/product/NPNEXCLU.html

bmwtye

You have to have a VIN # of an RS that had the CLA option.

I believe the part number for the version without the yellow stripe is:
997-347-803-71-A34

Your other option if you want the thicker wheel is send a standard one to Dallas Steering Wheel and have him add the additional pad to make it thicker.

TRAKCAR

WP0AC2A96AS783643
http://www.gt3rsregistry.com/2010GT3RS/vin/3643.htm
The car is coming up for sale soon. White / Gold 35K miles.

Rob996

I had my 2010 GT3 wheel recovered and made thicker with yellow stripe by The boys at Dallas wheel cover.. they did an awesome job. Here is a pic

Jms1

Re-covering the existing wheel may well be the option that I pursue since the CLA wheel with yellow centre marker seems so difficult to identify/source.

Thanks to all for the replies on this topic.

bmwtye

Yes. Unless you find one used somewhere

Larry Cable

I can pop my airbag module and read off the p/n# if someone really wants it

bmwtye

From what I've heard is this wheel is extremely hard to get from dealers as well. A need must be shown why the wheel is being replaced, it's not as simple as just calling up with a vin. There are a very limited number of these wheels sitting around, if any left at all

Larry Cable

ok will do - watch this space - I'll try and get to it before the weekend