When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I've had the WEVO mounts on for about 3 weeks and in terms of a noise/vibration issue, there really is none. I can't see a downside to this modification.
Agreed, I just installed mine (very easy BTW) and can't tell any difference in vibration. Gear changes already feel more precise, can't wait to feel the difference on track.
Put in RS mounts today. One difference was that my fastener underneath took a star drive bit, not an 18mm socket.
my car is an ‘09 C2S. The part circled was what I had.
Last edited by ColoradoMark; 06-09-2019 at 08:48 PM.
Reason: Typo
I'm interested in DIYing this too but had some questions about jacking up the crankcase. Do I jack it up so that the wheels come off the ground a few inches? Or just enough so that the chassis rises by a few inches, but the wheels are still on the ground?
05-16-2010, 10:09 PM
