997 GT3 Suspension upgrade?
06-28-2009 | 01:55 PM
#31
Advanced
Joined: Oct 2006
Posts: 90
Likes: 1
From: Brussels, Belgium, 1 hour West of Spa, 2 hours West of the Ring ;-)
On Toyos, I used to run them once in a while : I like their price plus the fishbone profile, as opposed to most other tyres which have bands in paralell where rubber is only accumulating on the inside. I recently bought a set of Pirelli Corsa Racing (not the Systems which are not suited for track use) - which has a similar pattern as the Toyo R888 - and it is by far the best compromise I have ever had on my GT3. Pity they are hugely expensive and so difficult to get hold of. The issue with the Toyo is primarily that the sidewalls are way too stiff : if you run a bit of camber it will eat the inside of the tyres in no time on the road.
Tom
Tom
06-28-2009 | 02:37 PM
#32
Drifting
Joined: Jul 2006
Posts: 3,065
Likes: 2
From: On Rennlist avoiding work
Victor transformed my car with his alignment help.. I have just about everything he mentioned upgrade wise, including the motons but just couldn't get it setup properly, it was a MESS for well over a year... After his setup, bang, first try night and day, can't thank you enough bud 
I'm glad I could help. Nobody helped me and it took me 2 years to sort.
