Pingo

Does someone have the correct measurements for placing the side decals?

AP997S

I saw a TSB (technical service bulletin) regarding placement on renntech.com.

I think you need to be a paid member to view or download it. It can't be copied, linked or printed from Renntech.com.

It's TSB# 6646.

PM me w/ you email address. I think I can send you the TSB.

meti

Maybe you can get a screenshot, so it will be copied in an image file

AP997S

It's a nine (9) page PDF file that's in some 'protected' format. I can email it but I can't do a screenshot or copy any of the contents.

It's over a 1 mbyte so I can't attach it to a rennlist.com thread.

If anybody wants it just PM w/ an email address.

gota911

Here is a link to the TSB. You will need to register and make a "donation" of $25 to be able to see the TSB.

Placement of 997 Side Decals - GT3, GT3RS, Turbo, & GT2

NSXTC

#1) Take a hi-res factory side shot of an RS (from Porsche's website) and use some reference point (i.e, side turn signal) to determine the scale in which you can use to roughly determine the location of the decals.

#2) Visit a dealer with one on the floor and measure.

flash1034

After reading the TSB, Im confused. Do you put the decal over the stock rear fender clear bra? There's no mention of removing them in the install intructions? Anybody know?

Thanks,

Flash

flash1034

Also, do the rear fender and front apron decals come with the Porsche decal kit for a GT3 or are they all separate part numbers?

Flash

mooty

read it again, it does say remove the oem clear film in front of the rear fender.