997gt3north

- bringing the car in tomorrow morning for the track allignment


- where can I buy the sub harness bars and GT3 seats for the best price?

- also decide to go with the GMC racing half bar

thx

Paul

LVDell

Schroth through Austin at TRG or straight from the US distributor HMS.

Seats, good luck. Very pricey and hard to find since they aren't readily stocked in the US. I think Bob (ViperBob) mentioned recently that he had a few sets left? As for fleabay you have to be careful, alot of copies have popped up.

I bought my factory sub mounts from Sunset Porsche (best price).

CWay27

Suncoast, check ebay they have multiple set for 2599$ in black. Sub brace should be around 150$ to 200$ for both (carnewal sells them for 100 euro for both). As for harness, LVDell should be able to tell you since he just bought a set not too long ago.

Damn Dell I was just talking about you......

LVDell

I bought my harnesses from TRG and they were drop shipped from HMS...go figure. IIRC they were $285 for the Profi II-6. Same price though both places. I bought my sub mounts (oem) from Sunset for $50/ea for my wife's car and for mine (just one seat) and the BK sub mount with the fire extinguisher mount attachemnt from CDOC.

mjb

Recently bought a couple of black leather GT3 seats and sub mount bar from Suncoast.
GT3 seats - $1295 ea; sub bar - $55 each.

What is GMC racing half bar? Do you mean GMG Cup harness/bar? That's the one I've decided to go with now. Liked the DAS but decided I didn't want to cut into the rear deck lid or have additional expense of a custom made lid to save the OE lid.

mooty

i would NOT run harness with just a harness bar. diaster awaits.

mjb

Mooty, the GMG Cup roll bar (they call it harness/roll bar) -here- is a beefed up TE bar with an extra cross brace for better rigidity/role protection. I think the DAS bar is a bit beefier but the GMG bar should be a step up from the TE bar. Do you not think that is sufficient for DE? I'm not planning on doing club racing.

Frank 993 C4S

I think we need to clarify which GT3 seats - 996 GT# seats or Euro CGT shells?

viperbob

One thing about the Porsche substrap mounts, they only are there to mount the substrap. I can not tell you how many of these I have had to remove from cars when someone wants a fire extinguisher installed. The Brey Krause substrap bar is designed to later attach their FE mount. This only takes 15 minutes later, instead of rebuilding the seat again.