Where Did You Get Your Wheel Spacers?
#1
Where Did You Get Your Wheel Spacers?
I need a set of spacers in the range 7mm to 10mm for my 997.1 (with the obligatory extended silver bolts)
These will bring my rear wheels out to the required 15mm +/-1 from stock.
I see most people using ECS Tuning and Sharkwerks.
Any other makes / recommendations?
Thnks
These will bring my rear wheels out to the required 15mm +/-1 from stock.
I see most people using ECS Tuning and Sharkwerks.
Any other makes / recommendations?
Thnks
#3
I use H&R myself. One the street and track. Can view an assortment of spacers here: http://www.pelicanparts.com/catalog/...pg4.htm#item12. Let me know if you have any questions.
__________________
Your Trusted Source For DIY and Parts
FREE SHIPPING over $99 click here
Porsche Parts | DIY Tech Articles | Facebook | Twitter | Instagram | YouTube | Promos
888.280.7799 | 6am - 5pm PST
FREE SHIPPING over $99 click here
Porsche Parts | DIY Tech Articles | Facebook | Twitter | Instagram | YouTube | Promos
888.280.7799 | 6am - 5pm PST
#6
I use H&R myself. One the street and track. Can view an assortment of spacers here: http://www.pelicanparts.com/catalog/...pg4.htm#item12. Let me know if you have any questions.
Got my 15's used as you see these more often
Trending Topics
#11
Ecs is good quality and not overpriced.
The ebay/amazon stuff might be fine if you get a good seller. To others point, cutting aluminum isn't hard. But junk cnc machines don't have the same tolerances and they might not include the proper center bore or required lip after 5mm.
You typically with the quality spacers get the necessary extended bolts too.
The ebay/amazon stuff might be fine if you get a good seller. To others point, cutting aluminum isn't hard. But junk cnc machines don't have the same tolerances and they might not include the proper center bore or required lip after 5mm.
You typically with the quality spacers get the necessary extended bolts too.
#15
Adaptec. They're one of the few companies that offer the important wheel centering flange on a 7mm spacer. RUF was the only other one I was aware of, but their could also be others.