Misha vs Getty Design
#1
Rennlist Member
Thread Starter
I drive a 05 997.1s. Please give me your opinion which is the best duck tail for my car. Thank you, Sent from my iPhone using Rennlist
Last edited by BaileyII; 05-21-2016 at 05:50 PM.
#4
Three Wheelin'
Getty....it replaces the whole deck. I believe the Mischa is a wing insert and therefore has a crease where it meets the stock deck. Color matching might be a challenge as well, but a good body shop will figure it out.
Getty has a great mold and fitment is pretty spot on, however others have had issues. Mine was spot on with just a little blocking on the bottom of the deck.
If you go with Getty, get the harness and primer options as it will save on painting/install time. The primer service makes the deck "ready for fitment", not painting but really cuts down on the finishing time. The harness will allow you to keep your old deck complete if that's what you want. I bought a new fan and the various rubber snubbers with attachment hardware so I literally can swap back to stock with only the four main bolts and plug in the harness.
Oh..sorry for the ramble, get the Getty!
Getty has a great mold and fitment is pretty spot on, however others have had issues. Mine was spot on with just a little blocking on the bottom of the deck.
If you go with Getty, get the harness and primer options as it will save on painting/install time. The primer service makes the deck "ready for fitment", not painting but really cuts down on the finishing time. The harness will allow you to keep your old deck complete if that's what you want. I bought a new fan and the various rubber snubbers with attachment hardware so I literally can swap back to stock with only the four main bolts and plug in the harness.
Oh..sorry for the ramble, get the Getty!
Last edited by SoCal C2S; 05-08-2016 at 12:11 PM.
#5
Racer
Join Date: Jan 2013
Location: North Carolina/Florida
Posts: 437
Likes: 0
Received 60 Likes
on
43 Posts
Getty....it replaces the whole deck. I believe the Mischa is a wing insert and there has a crease where it meets the stock deck. Color matching might be a challenge as well, but a good body shop will figure it out.
Getty has a great mold and fitment is pretty spot on, however others have had issues. Mine was spot on with just a little blocking on the bottom of the deck.
If you go with Getty, get the harness and primer options as it will save on painting/install time. The primer service makes the deck "ready for fitment", not painting but really cuts down on the finishing time. The harness will allow you to keep your old deck complete if that's what you want. I bought a new fan and the various rubber snubbers with attachment hardware so I literally can swap back to stock with only the four main bolts and plug in the harness.
Oh..sorry for the ramble, get the Getty!
Getty has a great mold and fitment is pretty spot on, however others have had issues. Mine was spot on with just a little blocking on the bottom of the deck.
If you go with Getty, get the harness and primer options as it will save on painting/install time. The primer service makes the deck "ready for fitment", not painting but really cuts down on the finishing time. The harness will allow you to keep your old deck complete if that's what you want. I bought a new fan and the various rubber snubbers with attachment hardware so I literally can swap back to stock with only the four main bolts and plug in the harness.
Oh..sorry for the ramble, get the Getty!
#6
Three Wheelin'
I'm going to be going with Getty in the coming months
#7
Three Wheelin'
Yep....took my Indy all of 3 minutes to disable the spoiler message...and he didn't charge me!
Last edited by SoCal C2S; 05-09-2016 at 04:28 PM.
Trending Topics
#8
Rennlist Member
Can any shop with a ______(PCM? the machine/computer for Porsche only) turn off the speed signal indicator and OEM spoiler?
#9
I have a new Misha ducktail I will be listing shortly. Contact me if you are interested. I am going to stay with stock wing. Both MFG's make a nice ducktail. Misha is a lower profile and allows you to keep visibility of the stock third brake light. You will just need to remove your stock wing and mount in position vs entire decklid with the Getty. Both require the program change as mentioned. There are a few posts with nice pictures of member installs as above.
#13
Rennlist Member
i went with the mischa unit but the getty's are good too...above info is all correct, getty is integral unit, mischa goes on top of oem decklid (i liked that it allows me to keep my original decklid, lettering and chmsl)... if u compare the pics u can see the getty kicks up an inch or so higher, blocks the oem chmsl
...and turning off the motorized wing button is no biggie... dealer did it in 5 min no charge
#15
Nordschleife Master
your car looks great from all angles.
i went with the mischa unit but the getty's are good too...above info is all correct, getty is integral unit, mischa goes on top of oem decklid (i liked that it allows me to keep my original decklid, lettering and chmsl)... if u compare the pics u can see the getty kicks up an inch or so higher, blocks the oem chmsl
...and turning off the motorized wing button is no biggie... dealer did it in 5 min no charge
i went with the mischa unit but the getty's are good too...above info is all correct, getty is integral unit, mischa goes on top of oem decklid (i liked that it allows me to keep my original decklid, lettering and chmsl)... if u compare the pics u can see the getty kicks up an inch or so higher, blocks the oem chmsl
...and turning off the motorized wing button is no biggie... dealer did it in 5 min no charge