FREE GROUND SHIPPING With Purchase of QuickJack Lift!
#46
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Great. Let me know if you have any questions, comments or concerns and be sure to post a picture of it once you get it all set up.
__________________
Your Trusted Source For DIY and Parts
FREE SHIPPING over $99 click here
Porsche Parts | DIY Tech Articles | Facebook | Twitter | Instagram | YouTube | Promos
888.280.7799 | 6am - 5pm PST
FREE SHIPPING over $99 click here
Porsche Parts | DIY Tech Articles | Facebook | Twitter | Instagram | YouTube | Promos
888.280.7799 | 6am - 5pm PST
Last edited by PelicanParts.com; 02-17-2017 at 01:46 PM.
#48
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Are you asking if the capacity of it will lift the Tundra? Yes, the BL-7000SLX unit has a capacity of 7,000lbs. You'll just want to measure your lifting point distances from front to rear as well as your wheel distance front to rear to make sure the overall frame length will work with your Tundra. I do know that it should work with the F-150 Raptor, but haven't personally confirmed if it fits with the Tundra. The jack pad spread on it is about 60" so if your lifting point front to rear is longer than that it wont work. Let me know if you have any questions.
Last edited by PelicanParts.com; 02-17-2017 at 01:46 PM.
#50
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Bump! Free ATF goes until March 1st! The 7000SLX unit is back in stock and you will receive the SUV adapters FREE! Smokin' deal.
Let me know if anyone has any questions.
Let me know if anyone has any questions.
#52
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
#54
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
I cannot confirm it will be compatible with your Cayenne as I have never measured the lifting points and wheel base of one myself. However, the BL-5000SLX was designed for the 997 so it will work for it. What I recommend you do is measure your front lifting point distance to your rear lifting point distance. Then do the same with the front end of the tire to the rear front tire. You don't want the tire distance to be shorter than 72.5", which I highly doubt it will be. You want to make sure the lifting point distance isn't greater than 60". Also, the curb weight for a '16 Cayenne is: 4,488 to 4,927 lbs. The BL-5000SLX has a capacity of 5000lbs so you will be very close to its capacity. The 7000SLX might be a better option if the measuring points all match up. It has the same measurements as the 5000SLX. Plus, the 7000SLX unit comes with the SUV adapters for free so that is an expense you will not have to worry about, but would have to purchase with the 5000SLX unit separately. Let me know if you have any questions.
#57
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
The promo for the free SUV adapters with a purchase of the 7000SLX unit has ended. However, the promo for free ATF with any QuickJack purchase has been extended until further notice. So, don't miss out on FREE ATF AND FREE GROUND SHIPPING.
CLICK HERE to watch the QJ in action and purchase yours today!
CLICK HERE to watch the QJ in action and purchase yours today!
#58
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Just to touch on this subject. We had a community member of ours successfully drop the engine in his 911SC with a 964 3.8L engine using the QJ unit (even without SUV adapters). If anyone wants to see more info on this please shoot me a PM.
FYI - Free shipping + free ATF fluid deal is still going on!
FYI - Free shipping + free ATF fluid deal is still going on!
#59
Please let me know if/when the SUV adapter promo ever comes back. I have a 997 and a Cayenne, neither of which need much in the way of service so I can wait. Free ATF fluid is not that much of a motivator.
#60
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Not sure if/when we will be doing that promotion again so it could be some time, but I will let you all know.