**TPC Racing Rear Top Mount Kit for 997 PASM-type Coilovers - Available Now**
#1
Premium Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
**TPC Racing Rear Top Mount Kit for 997 PASM-type Coilovers - Available Now**
Introducing the TPC Racing Rear Top Mount Kit for PASM-type coilovers. The purpose of this kit is to replace the OEM PASM-type rear rubber-suspended upper mounts with spherical bearing top plates that allow for articulation and allow for spring conversion to 60mm ID linear-rate springs. The articulation features eliminates "bending" action of the spring as the suspension travels. As a result it will reduce unwanted load at the shocks and reduce stiction, therefor the damping function of the shocks is undiluted by unwanted force. All the factory race car(Cup/R/RSR) have articulating rear top plates.
This kit is compatible with OEM GT3 PASM-type suspension and aftermarket Damtronic variant. Not compatible with OEM non-coilover struts.
TPC Racing 997 Rear Top Mount Kit includes:
Pair of billet aluminum top plates with European motorsport quality spherical bearing, with bearing offset to optimize shock stroke(travel).
Pair of billet aluminum spring hats for 60mm ID springs* ** Machined in USA.
Pair of stainless steel upper bushing nuts threaded for PASM-type shocks. Machined in USA.
Pair of stainless steel lower bushings. Shallow depth to allow for increased thread grip of the upper bushing nut. Machined in USA.
We have machined a limited number of the kits. They are available now. Please send inquires to: info@tpcracing.com or call us at 410-799-7223
Be sure to use discount code RL0315 for Rennlist member discount!
* Spring hats are available for other ID sizes springs(2.25", 2.50", 70mm).
** 60mm ID springs are available. Sold separately.
This kit is compatible with OEM GT3 PASM-type suspension and aftermarket Damtronic variant. Not compatible with OEM non-coilover struts.
TPC Racing 997 Rear Top Mount Kit includes:
Pair of billet aluminum top plates with European motorsport quality spherical bearing, with bearing offset to optimize shock stroke(travel).
Pair of billet aluminum spring hats for 60mm ID springs* ** Machined in USA.
Pair of stainless steel upper bushing nuts threaded for PASM-type shocks. Machined in USA.
Pair of stainless steel lower bushings. Shallow depth to allow for increased thread grip of the upper bushing nut. Machined in USA.
We have machined a limited number of the kits. They are available now. Please send inquires to: info@tpcracing.com or call us at 410-799-7223
Be sure to use discount code RL0315 for Rennlist member discount!
* Spring hats are available for other ID sizes springs(2.25", 2.50", 70mm).
** 60mm ID springs are available. Sold separately.
__________________
TPC Racing
Website: www.tpcracing.com
Email: info@tpcracing.com
Phone: (410)799-7223
Facebook | Youtube
2023 Porsche Sprint Challenge Champions
2021 Porsche Sprint Challenge Champions
2016 IMSA GT3 Cup Challenge Champions
2013 IMSA GT3 Cup Challenge Champions
2006 Grand Am Rolex 24hr of Daytona GT Winner
TPC Racing
Website: www.tpcracing.com
Email: info@tpcracing.com
Phone: (410)799-7223
Facebook | Youtube
2023 Porsche Sprint Challenge Champions
2021 Porsche Sprint Challenge Champions
2016 IMSA GT3 Cup Challenge Champions
2013 IMSA GT3 Cup Challenge Champions
2006 Grand Am Rolex 24hr of Daytona GT Winner