Porsche uses an "extreme climate package" which includes a third radiator for cars destined to UAE, etc.

I know it helps when my car is heat soaked here in South FL with 100% humidity and 99 degree temps. Car STAYS cool even in traffic.


That 3rd Rad Kit is priced WELL. I just wish that you had a mesh inlay to protect the 3rd rad from road debris. I already have the Rad, just need the mesh. let me know if you can source it for me!

John

 

Third rad is a no brainer, specially for the price. Had one for so long, bought when sun..... Had it at $150 then waited till warranty over, now on the can and you will say this had to be standard. I yhink i just increased my car engine's life by 10 more years!

 

Third rad is a no brainer! Specially with the price. Bought one long a few years back, waited for warranty to expire, installed. Now could not be happier with a very stable oil temp just around 90, even in bad traffic.

 

We offer the FK wire mesh that could be used, it does have to be cut to your needs though. For more information Click Here.

 

Definitely, there are some cool places around here to watch some insane cars run.
My favorite is cars and coffee, not a lot of fast driving but cool people, classy cars, lots to see. 1st weekend of every month.

 

I'll have to keep that in mind when planning my trip. Thank you

 

just purchased.. Awesome deal.

 

Thanks for the support

 

I have a c2s with a gt front bumper would this go where the smiley face is on the front bumper right below the frunk ends? Or does it mount like a front mount intercooler?

 

This radiator mounts like a front mount intercooler, in the center intake of your bumper. On a GT3, the smiley face is a vent for the hot air leaving the center radiator. Since this kit was not designed for the GT bumper, it will not use the smiley face vent, but directs the hot air downward instead. You could use a GT3 radiator setup, which angles the radiator more forward, and directs the hot air upward out the smile vent, however this would be considerably more expensive, since Porsche does not offer a ready-made kit for the GT bumper.

 

Thanks for the heads up.

 

Could you let me know how much the "considerable extra cost" is please. I have a GT3 front bumper also and have been considering adding a GT3 center radiator that gives the benefits of the down force in addition to the extra cooling.
Appreciate it.

 

We put together a kit for you with all the parts needed that we see fit using all OE parts expect for the radiator, which is the same (AKG) one Porsche uses. To view everything in the cart Click Here.

 

Thanks for doing this. Very helpful. Let me give it some thought and come back to you.

 

Anytime If you have any questions feel free to PM or just ask away and I'll get you an answer.