Show me your 997 with non-Porsche wheels
#1471
Rennlist Member
The following 2 users liked this post by monochrom3:
Carrera2RS (06-30-2023),
JAAM (07-01-2023)
The following 5 users liked this post by 997 Turbo:
Carrera2RS (07-02-2023),
flapjacksteve (08-24-2023),
Full Boost (07-04-2023),
Graufuchs (07-02-2023),
Home Run (07-04-2023)
#1474
Rennlist Member
If you're looking for an 18" Fuchs style but with modern manufacturing and ultra-high quality - these are fantastic wheels.
Zuffenhaus. 3-piece. Forged.
Shown below on my '88 3.2 Carrera - 17's (8F and 9R).
This wheel is featured on some Singer Porsches.
Zuffenhaus. 3-piece. Forged.
Shown below on my '88 3.2 Carrera - 17's (8F and 9R).
This wheel is featured on some Singer Porsches.
The following 8 users liked this post by Ironman88:
Carrera2RS (07-03-2023),
EVOMMM (07-03-2023),
Graufuchs (07-03-2023),
jbkusa (07-04-2023),
kru911 (07-03-2023),
and 3 others liked this post.
The following 12 users liked this post by mixed_menace:
Busta Rib (07-04-2023),
Bwoy1981 (07-04-2023),
Carrera2RS (07-04-2023),
Ed99 (07-20-2024),
flapjacksteve (08-24-2023),
and 7 others liked this post.
#1476
ThatRed997 looks amazing, well done !
What spec are your wheels ?
What spec are your wheels ?
Last edited by Carrera2RS; 07-04-2023 at 03:38 AM.
#1477
Why do I feel so left out!
Rennlist Member
Rennlist Member
The following users liked this post:
997 Turbo (07-04-2023)
#1478
Rennlist Member
#1479
So 7mm front and 15mm rear then ?
That's great as I was getting nervous about clearance with ET 58 and 12" so my outer edge will be 5mm less at the rear (-3-15+12.7) and the same at the outer edge on the front 9" ET50 (-7+6.7). I will move to 305/245 I think
That's great as I was getting nervous about clearance with ET 58 and 12" so my outer edge will be 5mm less at the rear (-3-15+12.7) and the same at the outer edge on the front 9" ET50 (-7+6.7). I will move to 305/245 I think
#1480
Rennlist Member
The following users liked this post:
Carrera2RS (07-04-2023)
#1481
Actually they will be the same for some reason I thought you said ET55 rear, my set will be like this in comparison, so outside almost identical !
#1482
Got the HREs on
19x8.5 et50 and 19x11 et60
still on the fence if I want to toss spacers on or not. I did order some 5mm which should be here this week, but can always send them back if I decide to not use them
19x8.5 et50 and 19x11 et60
still on the fence if I want to toss spacers on or not. I did order some 5mm which should be here this week, but can always send them back if I decide to not use them
Last edited by bgoetz; 07-05-2023 at 11:06 AM.
The following users liked this post:
WheelsB (07-14-2023)
#1483
Rennlist Member
#1484
That is my mistake mine are 8.5. I wouldn’t even install them if I was going to return them, I would just send them back.
The following users liked this post:
Dubber (07-07-2023)
#1485
Pro
These look like a SUPER interesting option. Fascinating that they are built by Fikse -- a name from the past. Great wheels. The thing leaving me cold is the super stale website with most of the pictures broken